Rack mounting

[Neil Johnson]

Received: from [193.35.220.5] by esprit.camcon.co.uk with SMTP
  (IMA Internet Exchange 1.04b) id 3f1f4880; Wed, 13 Aug 97 18:53:12 +0100
Received: from ganymede.camcon.co.uk by camcon.co.uk (4.1/SMI-4.1)
	id AA22850; Wed, 13 Aug 97 18:54:41 BST
Received: by ganymede.camcon.co.uk (4.1/SMI-4.1)
	id AA15926; Wed, 13 Aug 97 18:54:39 BST
Received: from ns1.sara.nl(192.16.188.198) by ganymede.camcon.co.uk via smap (V1.
3)
	id sma015902; Wed Aug 13 18:53:50 1997
Received: from horus.sara.nl (horus.sara.nl [192.16.188.40]) by ns1.sara.nl (8.8.
3/8.7.1) with ESMTP id TAA23235; Wed, 13 Aug 1997 19:52:01 +0200 (MET DST)
Received: by horus.sara.nl (8.8.3/4.04)
          id RAA17591; Wed, 13 Aug 1997 17:50:19 GMT
Received: from mail.enterprise.net by horus.sara.nl (8.8.3/4.04)
          id RAA253618; Wed, 13 Aug 1997 17:50:16 GMT
Received: from oakley (ppp179.enterprise.net [194.72.195.179])
	by mail.enterprise.net (8.8.5/8.8.5) with ESMTP id SAA22264
	for <synth-diy at horus.sara.nl>; Wed, 13 Aug 1997 18:50:21 +0100 (BST)
Message-Id: <199708131750.SAA22264 at mail.enterprise.net>
From: "Tony Allgood" <oakley at enterprise.net>
To: "Synth-diy" <synth-diy at horus.sara.nl>
Subject: Rack mounting
Date: Wed, 13 Aug 1997 18:31:42 +0100
X-Msmail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1161
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: owner-synth-diy at horus.sara.nl
Precedence: bulk
-------------- next part --------------
     Tony and List,
     
     Try a company called Rackz Products.  They do just what you're after.  
     I forget their telephone no. at the moment, but if you can get hold of 
     the April edition of Everyday with Practical Electronics I have a MIDI 
     project in that issue which uses one of their cases, and so their 
     contact details will be in the magazine (ShopTalk is the section to 
     look in).
     
     Otherwise, if you need any further info email me and I'll dig out the 
     details tonight and send them on to you tomorrow.
     
     Neil
     ----
     
     
     +---------------------------+-----------------------------+
      Neil Johnson               * All thoughts and opinions
      Cambridge Consultants Ltd  * expressed here are my own.
      email: nj at camcon.co.uk     * Heck, even _I_ don't believe
      http://www.camcon.co.uk    * what I say at times.....
     +---------------------------+-----------------------------+ 
     


______________________________ Reply Separator _________________________________
Subject: Rack mounting
Author:  "Tony Allgood" <oakley at enterprise.net> at Internet-PO
Date:    13/08/97 18:31


Does anyone know of a good source of 19inch rack cases for putting diy 
stuff in?
     
It really needs to be in the UK to keep the postage down. Maplin are OK for 
big cases, when I say big, I mean deep, rather than height. But I'm looking 
for something only about four inches deep. Maplins are too deep.
     
Any ideas??
     
Tony