More Modulus Panels and design news....

[Chris Crosskey]

Hi All, 
Modulus Panel news... 
I now have available Modulus drilling pattern panels and Panel Blanks 
(1/8" corner mounting holes only) available in satin white powdercoat 
and fine-texture black powdercoat. The panels are the same size as the 
Digisound ones (9"x3") but are very much sturdier, being made in 2mm 
steel. I also have some double-width panels (9"x6") available as 
blanks with corner holes, also in black or white in 2mm steel.
	Prices are 3 UKP for the 9x3, either colour, with or without 
the Modulus drilling, and 5 UKP for the 9x6. Carriage is extra, and 
remember that the panels weigh just over 250 grams each. I use 
Business Post for sending any number over four or five, where for 
about 7 UKP you can shift about ten kilos to anywhere in mainland UK. 
There will be a new drilled pattern along soon to take the 
sixteen-step sequencer modules, Walsh Function Generators and a 
bigger mixer panel, it's payback will be a reduction in choice of 
components, you'll have to use 16mm or thereabouts pots, and you'll 
want to use 15-16mm pots whereas the standard panels will take 22mm
pots and 19mm knobs easily.....
	If anyone is interested (mainly UK I guess) then get hold of 
me. The drilled white 9x3's are in rather short supply ATM, and the 
supply of 9x6's is rather limited too, however if there is enough 
interest I can get another batch made in approx 3 weeks....

chrisc