My evil modular plans

[Larry Leitner]

On Wed, 23 Apr 1997, brad sanders wrote:

> Paul Schreiber <synth1 at airmail.net> was saying...
> 
> >I also have been playing with the idea of DSP based projects.  I'd love it if Paul or some other talented designer would make and write up a project centered around a DSP.  I envision a board with a serial-port or midi interface for communications and software updates, as well as audio in/out and CV in/out jacks, several knobs and buttons and a small 2 line LCD display....
> 
> Except for the LCD, you've described the 56002 EVKit. It has a
> dedicated "debug" RS232 port, but it also has pads for another RS232
> port which comes directly from the 56002's async port (note this is a
> different port than the *sync* port which carries "audio" data). This
> port could just as easily be used for MIDI data.
> 
> So, for $150 you got mostly what you describe. No need to solder SMDs,
> as the board has virtually every usable DSP pin brought out to
> headers. If you really NEED the LCD, the 56002 has a "general purpose"
> parallel port where you could plug in such a module. Switches are also
> easy. To add features, all that's needed are daughtercards.
> 
> And software. 

** YES **

I've been toying around with getting one of these.  
Actually I've been lusting after the 56009EVM kit. (www.mot.com) 

2 audio ins
6 audio outs
Digital I/O
RS-232 port
LCD
Comes with software.
Can do Dolby AC-3

Just think, a voltage controlled digital module.  

What can we do.
1 cv in
1 audio in.
2 Oscillator Outs
2 Envelope Outs
2 cv outs (pitch, lfo, etc)


mmmmm.....

Larry

-- Do not underestimate the power of the dark side