AW: CV Clock Pt.II - PW. CVPWM

[Haible_Juergen#Tel2743]

>OK, I think I've decided on a design for the sequencer's clock.  It lacks
>one thing, though and that is a pulse width control, as well as a CV
>input for pulse width.  What I'd like to do is split the clock's output
>into five channels, one for clocking the sequencer, the other four to
>provide a gate output for each row.  I'd like each row to have
>independent note lengths, either controlled by a PW knob (as on the SQ10,
>ARP 1601, etc) or a CV input (as on the ARP).
>
>I'd appreciate any second opinions, as well as any leads to a simpler
>approach, if there is one.

Sorry for the second mail on this topic, but I sent my other one out before 
I read
this.
I suggest doing the PW stuff exactly the same way as you would in an audio 
range VCO: Use a SAW VCO and a Comparator. You can even use the
Hard Sync input of this VCO to sync it to an external clock source.

JH.