Joystick supplier

[Bob Zimmer]

At 01:30 PM 6/26/96, you wrote:
>Hey Bob - 
>
>Yeah, if they still have stocklet me know (please send their phone # too)
>
>- Thanks a lot,
>Chris
>
>
>ps.
>I don't know if you're still looking, but the C-2AQ model of tempcos from 
>KRL/Bantry *DO* work and come in 2K. It turns out the ones I had work as well, 
>but you can't use them in the feedback loop of the summer, they have to be
used 
>in voltage divider bewteen the base of the MAT-03 and ground.
>
Chris,

I just placed an order for two of them and they said they still have about
70 left, so you better hurry! (;^)

They have one of the best catalogs of useful 'stuff' that I've seen from a
surplus shop.  One other thing of interest might be:

  Part # G2713 Super Transformer @ 5.00 each

This has a 110V primary and 3 secondaries: 28 VCT @ 2A, 18 VCT @ 1A, and 16
VCT @ 2A.  I got a couple of these and with a LM317, LM337 and LM7805, they
make great analog power supplies (+15, -15 and +5).  I'm going to put a
schematic and board layout for one on my web page soon.

The joysticks are:

  Part # G7307 Industrial Type Precision Joystick @ 7.95 each

Reach them at:

  The Electronic Goldmine
  P.O. Box 5408
  Scottsdale, AZ 85261
  (800) 445-0697

Minimum order is $10.00 and S/H is a minimum of $5.00.

Could you tell me how to reach KRL and the prices on the tempco's?  I'll see
if I can get a group order together as I mentioned before!  Hope you don't
mind me posting this back to the list!

Bob

  >=== Bob Zimmer -- Philadelphia PA ===<
  >=== bzimmer at voicenet.com          ===<