rite of passage

[Mark Pulver]

At 05:08 PM 6/20/96 -0800, Matt Haines said:

>>Yup. I have one, and in a past life (like when I was building a lot) I used
>>it all the time.
>>
>>The tool works well, but you'll need a good metal file/Dremel grinder/etc to
>>clean up after it. The nibbler leaves little nooks and crannies around the
>>sides of the cuts. It's not hard to clean up after, but it is something that
>>you have to do. Depending on the gauge of the panel you're cutting, it sure
>>beats drilling a bunch of 1/4" holes side-by-side and grinding out all the
>>flash.

Wow... That's a pretty thick hunk of metal...

I know that the one I have won't, it's only good to maybe a 1/16", but I'm
figuring that larger nibbler's exist?

mark

----------------------------------------------------------------------------
Mark Pulver/Chicago, IL             The home of "Son of 'The MIDI Wall'"
mpulver at wwa.com                        http://shoga.wwa.com/~mpulver