Modular synths/Eurocards

[Jeremy Brookes]

Is there any kind of standard or popular pinouts for modular synths? I'm
building a modular based on Eurocard size boards because I have a rack with
a backplane for this and a power supply as well. The cards are the small
Eurocard (160mm x 100mm) with a 96 way connector. The power supply I've got
uses pins 28 and 32 for ground, 1 & 2 for -15v, 3 & 4 for +15v. (It also has
mains on pins 10, 12, 19 & 21 but I don't fancy having 240v on the back
plane next to my modules. I'll hack this bit.)

I was wondering if these are standard pin connections for power supplies and
are there any other common tracks used on th backplane, CV, gate, etc.

Many thanks for anticipated help.

Jezz.

_____________________________________________________
Try my website @ http://www.gaiacom.co.uk/users/jezz/
>>>>||||||||| Home of BlueBear Software |||||||||<<<<
Roland D-110 Casio CZ-101 Yamaha YS-100 C-Labs AWE-32
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^