ASM-1 Faceplates for sale (?)

[Troy Sheets]

> 
> >> - It's up to you to drill all holes (the place I was gonna take this to will 
> >> drill holes, but then they may be the wrong size for some people)
> >
> > Hmmm, for me, drilling the holes is what I am forseeing will be one of the 
> > biggest pains.  It seems we could agree on a size so the panels could be
> > drilled out for us.
> 
> I'd rather not. If you guys want to pay me a little extra, I could drill 
> holes for you (to spec) on my drill press, but otherwise it just doesn't make 
> sense because some people may want to use 1/4" jacks, some may use different 
>sized pots, etc. For example - the banana jacks I use fit in a different size 
>hole "normal" jacks beacuse the shaft is metal and it uses a spacer in the 
> hole to keep it from touching the face plate.

Not to harp on this too much, but another option is to agree on the type
of jacks and pots we would want to use, drill to that size, and then
buy the jacks and pots in bulk to get nice discounts.  Just an idea.
A whole panel kit would probably make more sense than just an undrilled
plate.  Of course, now it almost sounds like we are starting Synth-DIY Inc.!

-troy



------------------------------------------------------------------------------
tsheets at cyborganic.net                     <- You have found me   
tsheets at schwa.sun.com                      <- Official Use Only
http://www.cyborganic.com/People/tsheets   <- Instant Content
troys-list at schwa.sun.com                   <- Inquire Within