WTD: EMS VCS3 Board 'A' Schems

[Magnus Danielson]

> 
> I think I have a chance at getting a broken VCS3.  Problem is that board
> 'A' is thoroughly hosed.  My intention is to scan in the board's PCB
> traces and print out a new board with that Press and Peel stuff.  If
> anyone has schematics for this section, pcb layout - even a functional
> blockdiagram that shows me exactly what part of the synth is on this
> board, I'd be extremely grateful.

If you look at the EMS website at

http://www.hinton.demon.co.uk/ems.html

They now have a nice "Every Christmas needs a ... " add up :)

Then peek at the EMS modification page at

http://www.hinton.demon.co.uk/ems/emsmods.html

You will there find the powersupply schematics (VCS3 Mark I) which should help
you out some. 

Also read the "Power Supplies" part. If you are making a new PCB you should
read it.

There's numbers of good and interesting mods there, you migth consider applying
some of them while you are at it.

This is a good site in my opinion and it would be great if Graham Hinton took
the effort to improve it. I would be happy to see all schematics :)

Cheers,
Magnus