asm problems.

[Magnus Danielson]

> 
> > Important note:
> > 
> > The 2N4391 to 2N4393 does not have the rigth leg pinout, you will have to bend
> > the middle leg to end up on the other side or put the transistor on the 
> > soldering side. It took some time for me to find out about it...
> 
> That was it!  I have two functioning VCO's now.  Thanks for the tip.
> ASM-1 builders take note.

Nice that you have them running!

BTW. Troy sent a private mail to me but I replied on the list since I thougth
more people could enjoy the information.

Also, it is worth noting that an miss-oriented 2N4391 will heat up itself and
the CA3140 and LM311 considerable since the CA3140 will output a +15V and the
LM311 will pull to -15V and the only thing inbetween is the 2N4391 with it's
source and gate... so you be warned!

Cheers,
Magnus