asm problems.

[Troy Sheets]

> Important note:
> 
> The 2N4391 to 2N4393 does not have the rigth leg pinout, you will have to bend
> the middle leg to end up on the other side or put the transistor on the 
> soldering side. It took some time for me to find out about it...

That was it!  I have two functioning VCO's now.  Thanks for the tip.
ASM-1 builders take note.

-troy

------------------------------------------------------------------------------
tsheets at cyborganic.net                     <- You have found me   
tsheets at schwa.eng.sun.com                  <- Official Use Only
http://www.cyborganic.com/People/tsheets   <- Instant Content
troys-list at schwa.eng.sun.com               <- Inquire Within