PAIA EKx synth modules

[Bob Zimmer]

At 10:43 AM 4/23/96 +0100, you wrote:
>Hi All,
>
>I have a 1994 PAIA catalogue here and the EKx Module series looks interesting.
>Has anyone built any of these?
>
>
>Cheers, Dave ...
>
I had called PAiA about 4-5 weeks ago and they have very very little left.
I think that this had originally been a series of about 8-10 modules or so.

What remains are the VCFs and VCAs.  The VCOs and Envelope Generators are
sold out.  The VCA is based on the CEM3330 dual VCA chip and the VCF is
based on the CEM3320 chip.

The VCF is interesting as it includes a 14 pin DIP socket and a header plug
that one 'programs' (installs jumper wires) to set the board up as a High
Pass, Low Pass, Band Pass or All Pass Filter.  These are configured as
four-pole, 24 dB/Octave response.

Bob

  >=== Bob Zimmer -- Philadelphia PA ===<
  >=== bzimmer at voicenet.com          ===<