PLL circuit erratum. Builders please read...
Scott Gravenhorst, Synthaholic
chordman at ix.netcom.com
Thu Sep 21 05:22:12 CEST 1995
There is an error in the circuit as posted. It will appear to work as
is, but the mixer has low amplitude and positive peaks are clipped.
I had corrected this in my unit but the correction did not make it to
the final drawing.
I apologize profusely for this.
The drawing says to connect pin 4 of the LM324 op amp to ground. This
is incorrect. It should be connected to the V+ (8 volt positive for
FatMan) power supply.
Please accept my sincere apology for posting this with an error in it.
DOH!
--
-- Scott G., Synthaholic
There is no 12 step program for synthaholics. Thank your Superior Being.
More information about the Synth-diy
mailing list