VCO design research results

gstopp at gstopp at
Fri Sep 15 20:35:10 CEST 1995

     Great. You're the second one to offer to do this. The more the 
     merrier, I think. Email me your fax # and I'll send you the schematic. 
     I also have a list of notes on MAT-03 pinouts, slight variations from 
     the schematic, etc. that I would do if I were to do the CAD, in case 
     you're interested.

______________________________ Reply Separator _________________________________
Subject: Re: VCO design research results
Author:  The Old Crow <oldcrow at Access.Mountain.Net> at ccrelayout
Date:    9/15/95 10:27 AM
On Wed, 13 Sep 1995 gstopp at wrote:
>      Hi all,
>      If somebody wants to CAD up a circuit board that would be GREAT - I will 
>      probably try eventually but don't hold your breath.
     Send me a schematic.  I can have it done rather quickly.  I can also 
     make 'metalphoto' front panels.  (I have cloned a number of Paia 47xx 
     modules in this manner, as well as created several of my own.)

More information about the Synth-diy mailing list