<div dir="auto">I don't have any good advice on what exact product to buy, but it seems like a general "avoid the lowest-budget end" makes sense. Half a year ago I bought 10 of the cheapest gold-plated plugs available at Digi-Key or Mouser or Farnell - don't remember more than that they were very cheap but at least gold-plated - for just making zero-ohm shorted testing plugs for a project. <div dir="auto"><br></div><div dir="auto">When using them I was surprised to experience that some of them didn't fit the jacks properly. The tip, the ring, and the plastic insulation piece in between them were not really aligned well, so they ended up slightly too large to fit in some jacks where I'd never had any problems with any plugs for 15 years.</div><div dir="auto"><br></div><div dir="auto">And last week I noticed that all of them had a lot of corrosion/dirt on the "gold". After half a year! My other cables in the same place are still fine after 10+ years, being some mid-price Cordial product with at least a brand name on the actual plugs.</div><div dir="auto"><br></div><div dir="auto">I guess you often get what you pay for. :-)</div><div dir="auto"><br></div><div dir="auto">/mr</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">Den lör 5 sep. 2026 18:45Jimmy Moore via Synth-diy <<a href="mailto:synth-diy@synth-diy.org">synth-diy@synth-diy.org</a>> skrev:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I got a great deal on a spool of mogami w2944, so time to revive the patchbay project.   This is console wire, so has a very thin OD of about 2.54mm:<div><br><div><a href="https://mogamicable.com/category/bulk/console/#gsc.tab=0" target="_blank" rel="noreferrer">https://mogamicable.com/category/bulk/console/#gsc.tab=0</a><br></div><div><br></div><div>I foresee this causing some challenges with audio jacks that are designed around much beefier wire.</div><div><br></div><div>I'm curious if anyone had suggestions for preferred (1/4") connectors for this kind of thing.  I have a samson S-patch plus, so no TT or bantam jacks for me just yet.</div><div><br></div><div>I suspect the recommendation will be heat shrink tubing + neutrik jacks. I would love to hear what you think.</div><div><br></div><div>jimmy</div><div><br></div><div>PS: if anyone has some spare jacks or heat shrink you would be interested to sell, let me know!</div><div><br></div><div><br></div></div></div>
________________________________________________________<br>
This is the Synth-diy mailing list<br>
Submit email to: <a href="mailto:Synth-diy@synth-diy.org" target="_blank" rel="noreferrer">Synth-diy@synth-diy.org</a><br>
View archive at: <a href="https://synth-diy.org/pipermail/synth-diy/" rel="noreferrer noreferrer" target="_blank">https://synth-diy.org/pipermail/synth-diy/</a><br>
Check your settings at: <a href="https://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer noreferrer" target="_blank">https://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank" rel="noreferrer">marketplace@synth-diy.org</a><br>
</blockquote></div>