<div dir="ltr"><div>> What was this element, exactly, do you recall?</div><div><br></div>From a <a href="http://keyboardmag.com">keyboardmag.com</a> interview with Phil Dodds:<div><br></div><div>"The Soloist's troubles resulted from an all-analog design for both voicing and changing preset, plus a primitive but patented method of responding to aftertouch on the keyboard.  'Imagine a flat piece of metal about the size of a piece of chewing gum, and another one above it' Dodds explains. 'We took open-cell foam rubber that was impregnated with carbon and glued it to one of the metal sticks.  There was a gap between the foam and the metal stick above it, and there was a spring between them.  The whole keyboard was such that when you pressed down extra hard it would bring these two metal pieces together, compress the foam rubber, and become a variable resistor.  The problem was that the foam rubber had a shelf life of about eight months before it would dry out and quit working.  ...In the ProSoloist, there was a bar running underneath all the keys with two parallel strips of conductive material, a strip of carbon-based rubber placed over that, and on top of that was a layer of piano felt.  When you pressed the key hard, you'd be pressing into the piano felt, which would cause the rubber to engage across the two conductors to create a variable resistance [as the rubber was compressed between the metal strips].  It was a vast improvement because the rubber had a lot longer shelf life.' "</div><div><br></div><div>It's worth noting that my ProSoloist is over 50 years old and the aftertouch element still works.</div><div><br></div><div>On the Soloist, the element was placed between the synth base and the bottom of the keyboard frame.  You could see the entire keyboard moving in YT videos when pressure is applied for aftertouch.</div><div><br></div><div>On the ProSoloist, the element assembly was placed under the keys (the old Pratt-Read assemblies which each key had a metal shell that the plastic keyshell was fastened to), and fastened to a shelf on the metal assembly that formed the combs for the key bumpers.</div><div><br></div><div>US patent 3,784,935 covers the ProSoloist aftertouch system, invented by Al Pearlman and Dennis Colin.</div><div><br></div><div>MC</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Sat, Jul 11, 2026 at 4:52 AM Adam (synthDIY) <<a href="mailto:synthdiy@adambaby.com">synthdiy@adambaby.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="line-break:after-white-space"><br id="m_-7741032953647826784lineBreakAtBeginningOfMessage"><div><br><blockquote type="cite"><div>On 11 Jul 2026, at 08:29, Michael E Caloroso via Synth-diy <<a href="mailto:synth-diy@synth-diy.org" target="_blank">synth-diy@synth-diy.org</a>> wrote:</div><br><div><span style="font-family:Helvetica;font-size:13px;font-style:normal;font-variant-caps:normal;font-weight:400;letter-spacing:normal;text-align:start;text-indent:0px;text-transform:none;white-space:normal;word-spacing:0px;text-decoration:none;float:none;display:inline">Due to premature degradation, the aftertouch element did not have a long life in the Soloist. </span></div></blockquote></div><br><div><br></div><div>What was this element, exactly, do you recall?</div><div>I ask because the Hall sensor mechanism in my SH-2000, which gives a wonderful-feeling and musical aftertouch, is still working after 50 years....</div><div><br></div><div>A</div></div></blockquote></div>