<div dir="ltr"><div dir="ltr">Can't speak for anything but the ARP models....<div><br></div><div>The keyboard driver circuit is such that it generates low note CV + a differential voltage between the two keys.  The differential is actually opposite -- no second key, i.e. "0" differential causes it to output the maximum... in the 3620 keyboard for the 2600 that's 4V.  I am *assuming* that the Odyssey worked the same way, though it doesn't have a 4 octave keyboard.</div><div><br></div><div>The service manuals for these are pretty good, and understandable.  I haven't read the Ody one in a long while and never needed to look at the keyboard for it.  But I have spent a lot of time with the 2600 schematics, building various incarnations of the TTSH, and looking into ways around the drawbacks of the 3620 circuit (there was a clone, but it was part-for-part, and the wire contact keybeds that it was made to work with were hard to come by.... and led to some ugly and expensive workarounds).  Section 2 o the 3620 service manual has a pretty good description of the basic idea.</div><div><br></div><div>Pete</div></div></div>