<div dir="ltr"><div dir="ltr">"Piggybacking" is one way to approach this mod - in fact, Hermit, the author of the native C64 music tracker for 4 SIDs, modded a C64 for 3 SIDs with the piggybacking approach. I'll use stripboard :)</div><div dir="ltr"><br></div><div>Antti</div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Tue, Jul 29, 2025 at 10:05 PM Gordonjcp <<a href="mailto:gordonjcp@gjcp.net">gordonjcp@gjcp.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Tue, Jul 29, 2025 at 02:40:22PM +0300, Antti Pitkämäki via Synth-diy wrote:<br>
> <br>
> The basic idea for the mod is to connect an extra circuit board to the<br>
> original SID chip socket, which provides most of the required connections.<br>
> The SID only "listens" to the five least significant address lines. Hence,<br>
> in a stock C64 separate glue logic is utilized to provide the chip select<br>
> signal for the SID when memory locations allocated to it are accessed. In<br>
> my mod I'll use a 74LS138 decoder, enabled by the original chip select<br>
> signal. Two additional address lines will be connected to its inputs and<br>
> its outputs will be connected to the SIDs' chip selects, placing each SID<br>
> in its own dedicated memory space. With this system it would be very easy<br>
> to add up to 8 SIDs if I wanted to go totally crazy. But four SIDs for now<br>
> :)<br>
<br>
In the olden days we sometimes expanded memory by stacking RAM chips on top of the one already on the PCB, and bringing the /CS lines out to another address decoder.<br>
<br>
-- <br>
Gordonjcp<br>
<br>
________________________________________________________<br>
This is the Synth-diy mailing list<br>
Submit email to: <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
View archive at: <a href="https://synth-diy.org/pipermail/synth-diy/" rel="noreferrer" target="_blank">https://synth-diy.org/pipermail/synth-diy/</a><br>
Check your settings at: <a href="https://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">https://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a><br>
</blockquote></div>