<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Sat, Mar 22, 2025 at 2:42 PM Michael E Caloroso via Synth-diy <<a href="mailto:synth-diy@synth-diy.org">synth-diy@synth-diy.org</a>> wrote:</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div><div>Cloning the ARP sequencer is pretty ambitious.  Already figured out how to expand it from 16 to 32 steps.  The challenge was how to replace the slideswitches for the busses with toggle switches.  Easiest solution was open-collector TTL logic configured as an OR gate, but those OC parts were hard to find.</div></div></div></blockquote><div><br>Interesting.  John Daniels cloned the 1601 back when TTSH was all the rage, kits for those are still available from Synthcube.  He simply used the slide switches (some big honkin things) and it was a straight port I think at roughly the same relative size (what was it, 78% of original?) as the  TTSH.  <br><br>He also did a more limited clone of the ARP keyboard, with the problem being that the old type of keybeds weren't very available.  Someone (maybe John himself) came up with the idea of using relays with a more modern keybed but that was prohibitive in cost, so there weren't too many.  I've looked at the circuit a bit and think I have an idea to work around that and drive with a Fatar keybed and a microcontroller/DAC but so far I haven't been able to get my hands on one of the clones to verify if my understanding is right.<br><br><br></div></div></div>