Just to follow up.  The following is the circuit I used incorporating<br>Ian's suggestion which adds state LEDs to the Ray Wilson envelope<br>generator:<br><a href="http://home.cfl.rr.com/entropy/ADSRMod.jpg">http://home.cfl.rr.com/entropy/ADSRMod.jpg
</a><br><br>A picture here of my first modules with the ADSR in the center:<br><a href="http://home.cfl.rr.com/entropy/mods.jpg">http://home.cfl.rr.com/entropy/mods.jpg</a><br><br>A couple of notes - the PAIA MIDI2CV has a power ON/OFF with a
<br>momentary Reset position (this works as a great ALL NOTES OFF switch<br>without having the control voltages ramp down if you only use the<br>Power ON/OFF).  It also has a selector switch to select between the<br>V/Hz and the 1V/Oct option.  I also seperated the CV outs and the
<br>S-Gates and tied an LED to the gates.  The LEDs are indespensable for<br>me to show which outputs have activity.<br><br>The ADSR has the above state LED mod as well as a single Ken Stone<br>Utility LFO whose variable pulse out can be hard-switched to the ADSR
<br>gate to provide repeating envelopes.<br><br>The last module is the Ray Wilson VCO with an extra output added<br>(labeled MOD) which can switch between the VCO outputs with a control<br>voltage or the SEL pot (the LEDs show which output is selected)  and
<br>be attenuated from -1 to 1 via the Mod pot.<br><br>A humble beginning to modular madness.<br>