<div>Hi,</div>
<div> </div>
<div>  I bought a MXR 31 band rack mount EQ today at a 'fire sale'. I tested it out and it passes audio but it has a loud buzz. The buzz is much louder than the audio signal. The buzz is present even with no input. I can 'filter' the buzz when I boost or cut different EQ bands. 
</div>
<div>I just started poking around and measured voltage at the regulators. 7915 shows -20 volts at the input pin and -15 volts at the out pin. 7815 shows 15 volts at input pin and 10.75 volts at out pin. All components and traces look OK. There is a four pin chip in the power supply section , an 8302 (I don't know what it is or does).
</div>
<div>  If anyone could share schematics, service notes, info, or guesses as to the problem I sure would appreciate it.</div>
<div> </div>
<div>  The question doesn't seem relevant to SDIY. Any suggestions of good lists, forums, or places to post this?</div>
<div> </div>
<div> </div>
<div>Thanks,</div>
<div>peng</div>