Yes I believe someone has done so...<br>
AnyWare Instruments SEMtex "XL"<br>
<br>
<a href="http://www.anyware-instruments.de/navi_new/main.html">http://www.anyware-instruments.de/navi_new/main.html</a><br>
<br>
<br>
<br><br><div><span class="gmail_quote">On 3/2/06, <b class="gmail_sendername">Tim Parkhurst</b> <<a href="mailto:tim.parkhurst@gmail.com">tim.parkhurst@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On 3/2/06, mrmike <<a href="mailto:mrmike@clickbang.com">mrmike@clickbang.com</a>> wrote:<br>> Has anyone ever cloned an Obie SEM? I've always been facinated by them,<br>> but when broken ones go for US$500 on evilBay, it's not likely I'll be
<br>> buying one anytime soon. A quick look at the schematic shows most of the<br>> parts reasonably available. Anyone know a source for the concentric pots?<br>><br>> mrmike<br>><br><br>Besides the 3X dual concentric pots used for the VCO and VCF tuning,
<br>the other tricky mechanical bits on the SEM would be the dual tap pots<br>(correct nomenclature?) used for the mod depth/select, and the VCF<br>mode. The SEM is also a nice bit of packaging. If you ever look inside<br>
one, there are two stacked PCBs that hold pretty much everything, and<br>almost no point to point wiring. Of course, you could just clone the<br>circuitry and do a different panel & PCB layout to avoid the need for<br>
specialised (and expensive) pots.<br><br><br>Tim (correct nomenclature) Servo<br>--<br>"Imagination is more important than knowledge." - Albert Einstein<br><br></blockquote></div><br>