<b><span id="_user_synth-diy@dropmix.xs4all.nl"></span></b>hi,<br>
<br>
I have just moved and don't have my workbench setup yet, but just
before I left I did a few quick tests with the pt2396. It was
interesting enough so that I will continue working with it. You can
overclock this thing quite a bit. It seemed to be working with clock
frequencies at something like 15MHz and maybe more ( I didn't measure
). the 12ms is what the datasheet specifies for a 2MHz clock. So, I
think it will allow a reasonable range for modulation on any of the
delay settings that are chosen with the 4-bit binary input. running it
with the fast clock should also allow a larger bandwidth.<br>
<br>
the test was real quick. I was using the VCO from a pt2399. I did not
check sound quality or anything like that. I would think that the
capacitors in the modulator/demodulator might need some adjusting if
clocking this fast.<br>
<br>
-ryan<br>
<br><div><span class="gmail_quote">On 1/24/06, <b class="gmail_sendername">Andre Majorel</b> <<a href="mailto:amajorel@teaser.fr">amajorel@teaser.fr</a>> wrote:</span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">There's Ryan Williams' VC-echo based on the PT239x :<br><br>  <a href="http://www.sdiy.org/destrukto/vc-echo.html">
http://www.sdiy.org/destrukto/vc-echo.html</a><br><br>Ryan says the PT2396 can go down to 12 ms. But for realistic<br>stereo placement, you want 0.5 ms or less.<br><br>--<br>André Majorel <<a href="mailto:amajorel@teaser.fr">
amajorel@teaser.fr</a>><br><a href="http://www.teaser.fr/~amajorel/">http://www.teaser.fr/~amajorel/</a><br></blockquote></div><br>