<div id="RTEContent">If you have a sawtooth wave you could run it through<br>  a number of comparators, and make pulses each time one goes<br>  high. Combine the pulses and you have frequency multiplication.<br>  I think that this has been done with an LM3914 bargraph chip.<br>  <br>  iirc it was Grant Richter who did it...<br>  <br>  The Wiard/Blacet MiniWave uses a similar frequency multiplication<br>  technique...<br>  <br>  H^) harry  (can't say more, or they have to kill me :^)<br><br><b><i>Dave Kendall <davekendall@ntlworld.com></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">  Hi all.<br><br>Does any one know of a simple circuit that will produce a square or pulse<br>wave at 8 times the original input frequency? The idea is to use the<br>different waveforms from the EFM LFO5A staircase generator through a VC lag<br>to produce new waveforms. The staircase can produce some quite
 odd<br>repetitive waveforms if you tap into different points in the resistor<br>network on the 74LS93 outputs, but they are at 1/8th the clock frequency. if<br>using it with a Square wave VCO, the clock would need to be multiplied by 8<br>to be at the same frequency as the original.<br><br>Any ideas anyone?<br><br>Dave (just having removed sheep crap from the brake pedal:-)<br><br></blockquote><br></div>