<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
Yes it works. But the nonlinearity of the on resistor (the resistor
when the 4066 swiched on)and the on resistor value increases...<br>
increases. It best works on 15 volt. (low on resistor and nonlinearity)<br>
Cheers<br>
. .<br>
<br>
Magnus Danielson wrote:<br>
<blockquote type="cite"
cite="mid20040811.174548.109999366.cfmd@bredband.net">
<pre wrap="">From: <a class="moz-txt-link-abbreviated" href="mailto:WeAreAs1@aol.com">WeAreAs1@aol.com</a>
Subject: [sdiy] Run standard CMOS on 3.3 volts?
Date: Tue, 10 Aug 2004 23:38:04 EDT
Message-ID: <a class="moz-txt-link-rfc2396E" href="mailto:1aa.276e1946.2e4aee9c@aol.com"><1aa.276e1946.2e4aee9c@aol.com></a>
</pre>
<blockquote type="cite">
<pre wrap="">Hello DIY folks,
Is it possible to operate a standard CD4066 IC on 3.3 volts? I realize that
there are special low voltage versions of these chips, but they are all
surface mount types, and I want to use an old-fashioned through hole type. Anybody
know?
</pre>
</blockquote>
<pre wrap=""><!---->
3V is OK. I just checked!
Cheers,
Magnus
</pre>
</blockquote>
</body>
</html>