<P><BR>> I've tried just connecting a CV source to the input, but that<BR>> doesn't work. I'm not sure, but I'm guessing that this is<BR>> some kind of current-loop interface; it expects to see a<BR>> current flowing from the ring to the tip, so if you just hit the<BR>> tip with a CV it doesn't draw current from the ring and<BR>> therefore doesn't do anything. I'm thinking that I can use<BR>> an optocoupler as, in effect, a voltage-controlled resistor<BR>> to vary the current. I'm looking at the Fairchild H11F1.<BR>> This is an optocoupler with a linear bilateral detector.<BR></P>
<P> </P>
<P>I've seen some synths (eg Siels) where the expression pedal</P>
<P>doesn't become active until the supply to it sees some load.</P>
<P>I think the idea is to avoid leaving a CV input "blowing in the</P>
<P>wind" when there's no pot connected.  </P>
<P> </P>
<P>I don't know if that's how it's done in your example, but you</P>
<P>could try it by putting a resistor (around 10K) between the pedal </P>
<P>5v and 0v and then stick a CV into the return connection.</P>
<P> </P>
<P> </P>
<P>Steve</P><BR><span style='color:#000000;font-family:arial; font-size:10pt;'>Freeserve AnyTime - HALF PRICE for the first 3 months - Save £7.50 a month <br><a href='http://www.freeserve.com/anytime' style='color:#0000FF; font-family:arial; font-size:10pt;' TARGET='_blank'>www.freeserve.com/anytime</a></span>