<table width=100% dir="ltr"><tr><td><DIV id=wrteplaceholder name="wrteplaceholder"><BR>Thanks<BR>
<TABLE style="BORDER-RIGHT: 1px outset; BORDER-TOP: 1px outset; BORDER-LEFT: 1px outset; BORDER-BOTTOM: 1px outset" cellSpacing=0 cellPadding=0 width="100%" bgColor=#f0f0f0>
<TBODY>
<TR>
<TD><FONT size=2><B><resfreq@hoohahrecords.com></B><BR>Re: Re: [sdiy] Kawai SX-210 repaired !!</FONT></TD></TR></TBODY></TABLE><PRE dir=ltr>At 04:53 AM 7/17/03 +0300, gilwein@walla.co.il wrote:
<BR>> Thanks !    batteries. It was rather black colour, but the place it was
<BR>>found makes me think it was acid stuff.... It was just as close to the
<BR>>battery than to anything else.... strange...   Well, I understand a
<BR>>standard battery cannot be used as replacement, what type of battery should
<BR>>I use that doesn't require any mod to the circuit ? Is there such anyway ? 
<BR>
<BR>If the old battery was NiCad, that's the only type of battery that can be
<BR>used without modification.  In 10 years you'll need to worry about leakage
<BR>again (and after fixing a few Polysixes, trust me, you don't want to have
<BR>it leak)
<BR>
<BR>To modify the circuit is usually pretty simple... you just need to disable
<BR>the charging circuit.  In the case of the polysix, it only requires
<BR>replacing 2 or 3 components.... simple.  Then you can use any type of
<BR>battery (with correct voltage)  I used a Lithium coin-cell.  This is
<BR>definitely the best method!!!
<BR>
<BR>If you can scan the schematics around the battery area, someone should be
<BR>able to give you some advice.
<BR>
<BR>Dave Magnuson
<BR>
<BR>Resonant Frequency:
<BR>resfreq@hoohahrecords.com
<BR><A href="http://www.hoohahrecords.com/resfreq/index.html">http://www.hoohahrecords.com/resfreq/index.html</A>
<BR></PRE>
<HR noShade SIZE=1>
<BR><BR>
<HR SIZE=1>
</DIV></td></tr></table>
<br>
<hr size=1 noshade>
Walla! Mail, Get Your Private, Free E-mail from Walla! at:<br>
<a href="http://mail.walla.co.il">http://mail.walla.co.il</a><br>