<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial>Hello and thanks to everyone who, so far, have responded
to my request fro feedback on the ASM-Genie and new ASM-1 pcb.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Results so far:-</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<UL>
<LI><FONT face=Arial>Upgrade ASM-1 pcb to include all documented component
omissions and improved track layout</FONT></LI>
<LI><FONT face=Arial>Add triangle output to VCOs</FONT></LI>
<LI><FONT face=Arial>MIDI-CV to remain as a separate pcb</FONT></LI>
<LI><FONT face=Arial>Power supply to stay as a separate pcb</FONT></LI>
<LI><FONT face=Arial>Updated block diagram and front panel layout which now
shows 3.5mm jacks for expansion and additional inter-module
linking</FONT></LI>
<LI><FONT face=Arial>Ground planes will be added. Appreciate this makes pcb
less modifiable but the benefits far outweigh this loss</FONT></LI><FONT
face=Arial>
<LI>SMD option for Tempcos dropped.</LI>
<LI>Terminal pitch changed to 0.1" to allow for wider range of connectors.
Board uses 12-way, 8-way, 4-way and 3-way connectors.</LI>
<LI>All mandatory pots are now also bought out through 3-way 0.1" connectors
allowing pots to be 3-wired back to board or wired at the panel where less
than 3 wires are needed</LI></UL>
<DIV>Updated schematic and panel layout can be found on my website.</DIV>
<DIV><BR>Best Regards<BR>Laurie Biddulph</DIV>
<DIV> </DIV>
<DIV><A
href="http://www.ozemail.com.au/~boobies">http://www.ozemail.com.au/~boobies</A></FONT></DIV></BODY></HTML>