<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.0.5762.3">
<TITLE>Odp: [sdiy] Polymoog as Controller Keyboard?</TITLE>
</HEAD>
<BODY dir=ltr>
<DIV>I haven't actually started playing with the CV out of the Polymoog.
The thought only came to mind when I started tossing around the modular idea.
From what the service manual says, the keyboard is split into a 24 note lower
section (E1 to Eb2) and a 47 note upper section (E3 to D6). It looks like the
Lower/Upper selector determines where the CV comes from and the Split/All
determines where the trigger out comes from. </DIV>
<DIV> </DIV>
<DIV>Tony</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT size=2>-----Original Message----- <BR><B>From:</B> Roman
[mailto:modular@go2.pl] <BR><B>Sent:</B> Fri 8/2/2002 1:17 PM <BR><B>To:</B>
May, Tony; synth-diy@dropmix.xs4all.nl <BR><B>Cc:</B> <BR><B>Subject:</B> Odp:
[sdiy] Polymoog as Controller Keyboard?<BR><BR></DIV></FONT>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<P><FONT size=2>I haven't tried that, although it seems like so<BR>big power
supply as in PM<BR>wouldn't mint powering few extra modules.<BR><BR>Actually I
wanted to ask you how did your Polymoog<BR>work as CV source.<BR>When I
connected mine, it turned out CV is valid<BR>only while playing upper<BR>2
thirds of the keyboard. Anything pressed on<BR>lower part generated no
CV.<BR>and all started from 0V at the begining of middle<BR>keyboard
part.<BR>Do you get proper CV response from
entire<BR>keyboard?<BR><BR>Roman<BR><BR>----- Original Message -----<BR>From:
May, Tony<BR>To: synth-diy@dropmix.xs4all.nl<BR>Sent: Friday, August 02, 2002
7:01 PM<BR>Subject: [sdiy] Polymoog as Controller Keyboard?<BR><BR><BR>Just
wondering if anyone out there has ever had<BR>any luck, or even bothered
trying, using the<BR>Polymoog as a controller keyboard for oh, let's<BR>say, a
modular. I ask because I have now gotten<BR>the it to a fairly good working
state of being,<BR>and have decided, for my next adventure, to try my<BR>hand
at putting together some modules. Of course,<BR>I've got the cv and trigger
outs on the Polymoog,<BR>but what about using the accessory
power<BR>connection as a start for powering the modules? I<BR>imagine I
wouldn't want to tap into it to much and<BR>draw too much current off of the
power supply.<BR>This may sound silly, but so did me saying I was<BR>actually
going to fix the Poly. Thoughts
anyone?<BR><BR>Tony<BR><BR></FONT></P></BLOCKQUOTE>
</BODY>
</HTML>