[sdiy] New PCB layouts for Buchla 291, 294, and 295

[Lanterman, Aaron D]

I did some layouts for these circuits (EAGLE files, Gerber exports using JCLPCB’s CAM file, image exports of the schematics and layouts, etc) and stuck them on my GitHub:

https://github.com/lantertronics/buchla-based-pcbs

The PCBs are small enough to fit in a Eurorack/Frac Rack format.

I’ll write up some READMEs with more details soon, but you should be able to look at the schematics and figure out what’s going on.

These layouts are dedicated to the public domain, so do whatever you like with them.

These are untested. I have the 291 and 295 boards on order from JCLPCB but who knows when I will get around to testing them. I wanted to go ahead and get them up in case I get hit by a bus or something. That said, I will try to avoid being hit by busses.

Aaron Lanterman, Prof. of ECE, Georgia Tech
My blog on Education and Innovation: https://edupocalypsenow.wordpress.com
My blog on Electronics and Programming: https://lantertronics.blogspot.com
My YouTube channel on Electronics and Programming: https://www.youtube.com/c/lantertronics



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20230105/5413e7c3/attachment.htm>