[sdiy] Using dual BBD chips for higher clock frequency

Roman Sowa modular at go2.pl
Fri Jun 17 11:20:56 CEST 2022


I may be wrong, but possibly prefering BBD over ADC-RAM-DAC is the same 
thing as tube audio amp vs. solid state one.
Price, performance, ease of use, unobtainable parts - it all does not 
matter then.

Roman


W dniu 2022-06-17 o 11:01, Mike Bryant pisze:
> BBD is only about 12 bits accuracy at best, and there's plenty of cheap ADC/DACs that can run 12 bits at many megahertz.    Pair one of these with a cheap ARM processor with lots of memory.
> 
> -----Original Message-----
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Jay Schwichtenberg via Synth-diy
> Sent: 17 June 2022 02:02
> To: synth-diy at synth-diy.org
> Subject: Re: [sdiy] Using dual BBD chips for higher clock frequency
> 
> Isn't one of the advantages of using a BBD over a digital solution is the clocking can go to 500 KHz to 1MHz?
> 
> So depending on the clock freq you can get the aliasing filters higher up and have better freq range.
> 
> Jay S.
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
> 


More information about the Synth-diy mailing list