[sdiy] Synth Panels Designer MEGA UPDATE!

Mike Bryant mbryant at futurehorizons.com
Mon Jan 17 17:10:10 CET 2022


Does anybody on here do concept design for audio front panels ?   I need a look for a new brand of products and the (totally fair) comments on my own attempt was “it looks very 1970s/80s”.

Please email me if interested.


From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of francesco mulassano via Synth-diy
Sent: 17 January 2022 11:45
To: SYNTH DIY
Subject: [sdiy] Synth Panels Designer MEGA UPDATE!

Ciao, I have released a new MEGA UPDATE of my Inkscape extension for Panels Design!
Download here https://synthpanels.design
User manual https://sndmt.link/SPD-manual

Synth Panel Designer 1.5 The Mega Update - 16 January 2022

Starting from this version you need INKSCAPE 1.2
For some reason, Inkscape 1.1 broke the units conversion (fixed in 1.2-dev)

PANELS
- Removed VCV Rack Panel

KNOBS SCALE
- Added the so-called Nautilus Mode. You can set Start Tick Lenght and End Tick Lenght to create a scale that grows progressively
- Add Tick Dots. Now you can have single or multiple dots at the end of the main ticks, by playing with negative parameters, we can create artistic compositions of ticks
- LAYERS!! Recently I worked on a complex project for a large panel, I found myself with some difficulties that I tried to compensate by creating new layers. Now, for each scale we add a layer dedicated to the CENTERING CIRCLES, one dedicated to the DRILL PLANE (to send the panel into production) and one (the PCB PLAN) for the electronic component's position on the PCB. This makes it easier to work by activating and deactivating only the layers we need.

SLIDER SCALE
- LAYERS!! Now, for each scale we add a layer dedicated to the DRILL PLAN (to send the panel into production) and one (the PCB PLAN) for the electronic component's position on the PCB. This makes it easier to work by activating and deactivating only the layers we need.

JACK
- Improved parameters
- LAYERS!! Now, for each jack we add a layer dedicated to the DRILL PLAN (to send the panel into production) and one (the PCB PLAN) for the electronic component's position on the PCB. This makes it easier to work by activating and deactivating only the layers we need.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20220117/4fe33da6/attachment.htm>


More information about the Synth-diy mailing list