[sdiy] Synth Panels Designer MEGA UPDATE!

Matti Palm matti.palm at gmail.com
Mon Jan 17 16:31:16 CET 2022


I downloaded 1.2 from here:
https://inkscape.org/release/inkscape-dev/?latest=1

On Mon, Jan 17, 2022 at 4:24 PM Jean-Pierre Desrochers <jpdesroc at oricom.ca>
wrote:

> > Starting from this version you need INKSCAPE 1.2
>
> The only available version of Inkscape is 1.1.1 so.. not compatible with
> SPD 1.5
>
>
>
>
>
> *De :* Synth-diy <synth-diy-bounces at synth-diy.org> *De la part de*
> francesco mulassano via Synth-diy
> *Envoyé :* 17 janvier 2022 06:45
> *À :* SYNTH DIY <Synth-diy at synth-diy.org>
> *Objet :* [sdiy] Synth Panels Designer MEGA UPDATE!
>
>
>
> Ciao, I have released a new MEGA UPDATE of my Inkscape extension for
> Panels Design!
> Download here https://synthpanels.design
> User manual https://sndmt.link/SPD-manual
>
> *Synth Panel Designer 1.5 The Mega Update - 16 January 2022*
>
> Starting from this version you need INKSCAPE 1.2
> For some reason, Inkscape 1.1 broke the units conversion (fixed in 1.2-dev)
>
> PANELS
> - Removed VCV Rack Panel
>
> KNOBS SCALE
> - Added the so-called Nautilus Mode. You can set Start Tick Lenght and End
> Tick Lenght to create a scale that grows progressively
> - Add Tick Dots. Now you can have single or multiple dots at the end of
> the main ticks, by playing with negative parameters, we can create artistic
> compositions of ticks
> - LAYERS!! Recently I worked on a complex project for a large panel, I
> found myself with some difficulties that I tried to compensate by creating
> new layers. Now, for each scale we add a layer dedicated to the CENTERING
> CIRCLES, one dedicated to the DRILL PLANE (to send the panel into
> production) and one (the PCB PLAN) for the electronic component's position
> on the PCB. This makes it easier to work by activating and deactivating
> only the layers we need.
>
> SLIDER SCALE
> - LAYERS!! Now, for each scale we add a layer dedicated to the DRILL PLAN
> (to send the panel into production) and one (the PCB PLAN) for the
> electronic component's position on the PCB. This makes it easier to work by
> activating and deactivating only the layers we need.
>
> JACK
> - Improved parameters
> - LAYERS!! Now, for each jack we add a layer dedicated to the DRILL PLAN
> (to send the panel into production) and one (the PCB PLAN) for the
> electronic component's position on the PCB. This makes it easier to work by
> activating and deactivating only the layers we need.
>
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
> Selling or trading? Use marketplace at synth-diy.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20220117/9325e77d/attachment.htm>


More information about the Synth-diy mailing list