[sdiy] Question for the self-assembly SMD-ers here

Chris McDowell declareupdate at gmail.com
Fri Feb 18 17:58:36 CET 2022

This looks a tricky but not insane. If I were doing it, I would mix solder paste with lots of extra flux and dab small amounts onto those pads, then hit it with hot air. trying to use a stencil after other parts are placed around a footprint has not worked well for me, but the fluxy dab usually does. 

Chris McDowell

> On Feb 18, 2022, at 10:40 AM, Mike Bryant <mbryant at futurehorizons.com> wrote:
> Is it possible to assemble this product by hand ?
> https://www.infineon.com/cms/en/product/power/class-d-audio-amplifier-ic/integrated-class-d-audio-amplifier-ics/ma5332ms/?redirId=160809 <https://www.infineon.com/cms/en/product/power/class-d-audio-amplifier-ic/integrated-class-d-audio-amplifier-ics/ma5332ms/?redirId=160809>
> I can get a PCB made at JLCPCB with all the support circuitry on it and leave plenty of space for this IC, but not sure if it’s possible to assemble this part afterwards.
> It has a recommended stencil design in the datasheet which seems pretty tight for manual placement.
> Alternatively anybody in the UK with whatever equipment is needed and willing to do it (paid for obviously) please email me.
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org <mailto:Synth-diy at synth-diy.org>
> http://synth-diy.org/mailman/listinfo/synth-diy <http://synth-diy.org/mailman/listinfo/synth-diy>
> Selling or trading? Use marketplace at synth-diy.org <mailto:marketplace at synth-diy.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20220218/526a8a7e/attachment.htm>

More information about the Synth-diy mailing list