[sdiy] Buchla 291e teardown

[Roman]

And let's not forget about 5-stages voltage controlled ADDSR I've made in past century using SSM2164 as the workhorse, apart from oscillators and filters which seems so natural nowadays.
But that's ancient history now

Roman 


---- Użytkownik David G Dixon via Synth-diy napisał ----

> Yep, I only use 2164 in all my filter designs.  I built one filter with 13700 when I got started with electronics, and it was great, but the 2164 is just so convenient and works so well.
> 
>  It also makes great VCAs, VCOs, multipliers, crossfaders, linear FM and through-zero FM drivers, frequency shifters, and was even at the heart of the original Quadra, which was functionally identical to the Buchla 281.
> 
> 
> From: Synth-diy [mailto:synth-diy-bounces at synth-diy.org] On Behalf Of Darren Shorsky via Synth-diy
> Sent: Monday, December 26, 2022 10:03 AM
> To: synth-diy mailing list; Lanterman, Aaron D
> Subject: Re: [sdiy] Buchla 291e teardown
> 
> [CAUTION: Non-UBC Email] 
> 
> If it uses the 2164..... it may be similar to any one of the filters that Dave Dixon has built over the years.
> 
> The 2164 being his go to chip for almost everything.....  he also doesn't use vactrols as far as I'm aware.
> 
> Perhaps he'll come by and shed some light. fwiw.
> 
> 
> d.
> 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20221227/153c65c8/attachment.htm>