[sdiy] Two parameter mechanical controller thoughts....
pete.hartman at gmail.com
Mon Jun 10 21:59:11 CEST 2019
On Mon, Jun 10, 2019 at 2:54 PM thresholdpeople <
thresholdpeople at protonmail.com> wrote:
> And personally I'd use a 10-turn pot over an encoder. The circuitry will
> be far simpler.
the primary goal is being able to smoothly adjust two parameters at the
same time. 10-turn pots don't really enable that in my experience, quite
If you put it on the pulley, then honestly it's not any better than a
standard pot with appropriate gearing to make a full throw go from CCW to
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Synth-diy