[sdiy] Fatar Keyboard wiring diagram vs. Pratt-Reed Keyboard
modular at go2.pl
Mon Feb 25 09:33:38 CET 2019
Wow, that looks like $5000 keyboard!
If you're after wooden keyboards, then maybe contat this guy in Germany:
And there are also obvious choices like UHT and Laukhuff, I think they
were mentioned already.
W dniu 2019-02-24 o 18:16, Terry Shultz pisze:
> Hello Luis,
> You are correct, The Fatar folks do not respond to email very well.
> It appears that I will have to call them and see if I can get a better
> The kluge klaviaturen gmbh
> <https://www.google.com/search?client=safari&rls=en&q=kluge+klaviaturen+gmbh&ie=UTF-8&oe=UTF-8> company
> is whom I worked with when I worked at PPG and built the PRK expansion
> I have heard that Steinway in Hamburg may have acquired this company in
> 1998 , however thay may still be willing to see Piano Beds still for
> upgrading pianos etc.
> I used Wersi organ spring contacts for this double bussed design, but I
> am not sure if these are still available from Wersi.
> good hunting.
>> On Feb 24, 2019, at 7:09 AM, Luís Marka <luis.marka at terra.com.br
>> <mailto:luis.marka at terra.com.br>> wrote:
>> Hi mr. Terry,
>> I tried to purchase one Fatar keyboard recently with no success. They
>> simply do nor respond emails apparently.
>> Doepfer keeps links to several Fatar schematics, here:
>> If you complete a purchase from Fatar, I am interested in purchasing
>> one 5-octave unit, let me know and we can arrange. Keep in mind I am
>> located in Canada.
>> Best regards!
>> Luis Marka
>> On 22/02/2019 19:55, Terry Shultz wrote:
>>> Hello folks,
>>> I am running out of 61-note Pratt reed keyboards that I have been
>>> sitting on for 20 _ years.
>>> Down to the last 5 units, I started out with 30 units and have been
>>> using them up.
>>> Back in the late 1970’s I licensed the E-Mu patented poly keyboard
>>> design from E-Mu and I have been building
>>> a few Mono and Poly keyboards up. I will now have to buy some Fatar
>>> keyboards and they are requiring me to
>>> buy quite a few for packing reasons.
>>> Does anyone have the schematic to this brand of 5 octave keyboard as
>>> I will have to adapt it to my existing
>>> Otherwise, I might just go the route of Midi to CV/Gate Module as an
>>> alternate path.
>>> Any suggestions on whose Midi to CV/Gate module is the best and how
>>> many channels out would be good to know.
>>> best regards,
>>> Terry Shultz
>>> Shultz Products LLC.
>>> Synth-diy mailing list
>>> Synth-diy at synth-diy.org
> Synth-diy mailing list
> Synth-diy at synth-diy.org
More information about the Synth-diy