[sdiy] Problems with linearized SSI2164 ?

[Mattias Rickardsson]

On Thu, 14 Feb 2019 at 22:10, David G Dixon <dixon at mail.ubc.ca> wrote:

> Increasing the resistors from 30k to 100k also fixed the problem, with the
> same 22pF cap in place.
>

FWIW, 100k gives higher noise floor than 30k - but improves the THD a bit.

Depending on the design, the "right" choice could be either one.

/mr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20190215/8074bd41/attachment.htm>