[sdiy] speaking of tantalums...

[Adam Inglis]

> On 26 Nov 2018, at 10:07 PM, Neil Johnson <neil.johnson71 at gmail.com> wrote:
> 
> As for replacing, the rule I tend to use is replace tants with
> aluminium elect of 10x the value if you can fit them in.  Anywhere
> around DC-DC converters is tricky territory so consult manufacturer's
> data sheets for capacitor selection advice.


Great info thanks Neil.
And re the aluminium electros, the temp  rating - 105˚ ?
And the voltage rating - much closer to the operating voltage I’d assume, as usual with electros?

cheers
Adam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20181127/62d7c57c/attachment.htm>