[sdiy] 2164 stability values

[Neil Johnson]

Hello David,

For 100k input resistors you can use the same 500R/560p compensation network.

Neil


On 27 June 2018 at 19:27, David G Dixon <dixon at mail.ubc.ca> wrote:
> Hello List,
>
> This is mostly a query for Neil Johnson:
>
> If I change the 30k resistors around 2164 to 100k, what should the 500R-560p
> stability network be changed to?
>
> According to my calculations (which are probably wrong), the 3dB point with
> the 30k resistor is around 4kHz.  If I put in a 100k resistor, it goes down
> to around 1.2kHz.  Obviously I'm doing this wrong.
>
> Thanks in advance!
> Dave Dixon
>



-- 
http://www.njohnson.co.uk