[sdiy] SMT Stencils

[Miles Stevens]

I'm definitely not expecting the world, but for US$7 for a workable area of
290x190mm from JLCPCB is worth a punt in my opinion.

Yeah will post results when I play around

On 30 July 2018 at 19:21, wot wot <synth-diy at dadacafe.org> wrote:

> Hi,
>
> On 07/30/2018 03:14 AM, Miles Stevens wrote:
> > Hi,
> >
> > With stencils being so cheap from all the usual PCB supplier, I was
> > thinking today about trying them out for use as a basic stencil for
> > painting pedal enclosures. Does anyone have any experience with abusing
> the
> > stencils?
> >
> > Cheers
>
> i'd guess it'd depend on how accurate want the edges to be. In some
> cases i would apply sticky paste onto the surface, cover it with
> bimetal film, cut that into a stencil, clean and then paint. The
> metal stencil might make that easier too or even work on its own. If
> you try, please tell us about the results.
>
> Cheers
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20180730/31d78ad9/attachment.htm>