[sdiy] Keyboards good for scrap / repurposing?

sleepy_dog at gmx.de sleepy_dog at gmx.de
Mon Feb 19 12:06:56 CET 2018


Ben Bradley wrote:
> I may have posted this link before - I've purchased old organs cheap
> from thrift stores and such. Yes they're bulky, and do take a bit of
> time to take apart. I finally took apart the Kimball 1500, two
> Pratt-Read 61-note keyboards, one with a diodes in series with every
> switch and wired as an 8x8 matrix, the other with a straight 61
> contacts to a single bus bar. It's full of stuff, about a hundred
> small PC boards. I haven't begun to look through the chips to see if
> there's anything like CA3080's yet. Other goodies, a really long
>
> Accutronics spring reverb and a two-speed one-rotor Leslie.

Oh! Two more interesting parts to salvage :-)


- Steve


>
> https://www.muffwiggler.com/forum/viewtopic.php?t=161049
>
> On Sun, Feb 18, 2018 at 7:33 PM,  <rsdio at audiobanshee.com> wrote:
>> I’m fairly certain there are online videos of the inside of these old organs. The Hammonds, in particular, have quite a support network of How-To Repairs.
>>
>> On Feb 18, 2018, at 3:03 PM, sleepy_dog at gmx.de wrote:
>>> While this probably does sound like a lot of effort to get 2 small keyboards, I have to say, I am rather curious about taking apart one of those monsters, I have never directly seen one inside. So it would actually be fun by itself :D  (If only I had the room, I might even keep the "enclosure" (more like furniture) and put different electronics inside...)
>>>
>>> - Steve
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at synth-diy.org
>> http://synth-diy.org/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at synth-diy.org
> http://synth-diy.org/mailman/listinfo/synth-diy




More information about the Synth-diy mailing list