[sdiy] single transistor VCA (was OTA VCA)

Elain Klopke functionofform at gmail.com
Thu Mar 23 17:15:58 CET 2017


can I attach a picture or are attachments taboo in the list?

So I really need the buffer? I will have to order some op amps tomorrow
then.

Right at this moment, I have 0V and +5V at my disposal.

On Thu, Mar 23, 2017 at 10:30 AM, Mattias Rickardsson <mr at analogue.org>
wrote:

> It would help with a schematic of your actual circuit, since almost
> everything seems to differ from the schematic you linked to. :-)
>
> So, you are connecting the transistor to a small speaker, via the 100k
> resistor? Or without it?
> I wouldn't expect a sound in either case, due to the tiny tiny signal
> (if the 100k is included) or the heavy heavy loading of the transistor
> (if it's not).
>
> Btw, when changing the 2.5 V points into ground, du you have a CV
> generator that reaches 2.5 V below ground as it needs to do?
>
> /mr
>
> On 23 March 2017 at 16:22, Elain Klopke <functionofform at gmail.com> wrote:
> >>
> >> What I mean is... how do you connect and measure things?
> >>
> >
> > I have a tiny speaker. It's worked thus far. My oscilloscope is in
> another
> > state at the moment.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20170323/f8d2165d/attachment.htm>


More information about the Synth-diy mailing list