[sdiy] Kobol Schematics?
Gergo_Palatinszky at epam.com
Fri Jul 13 08:00:16 CEST 2012
Moreover you can use Juergen Haible's(RIP) linear detuning modification which is available for SEM VCO in the net...
From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Julien Delgoulet
Sent: Friday, July 13, 2012 7:03 AM
To: Dave Manley
Cc: Synth DIY List
Subject: Re: [sdiy] Kobol Schematics?
Here comes a french ;-)
So James, what you would like to do ?
If you are looking for the schematics for some DIY, may be you don't need the whole schematics ...
Here are my tought:
Basically, the interesting part of the kobol is its VCO (env and filter are ssm based) According to Mark Verbos, the VCO is a ripoff of an oberheim SEM with a UA726 for the expo. So you might use the original SEM VCO design which uses CA3046.
Now the interresting part is the waveshaper... and a NICE person (Mark Verbos) decided to share his redrawn schematic here :
There is also his redraw of the VCO core :
From that you could start building the VCO ...
Also from this page of the schematics (http://www.univertron.com/SAS/manuals/RSF/Kobol%20Expander%20Schematics/4.jpg) , this picture (http://www.flickr.com/photos/roginator1/5227283469/in/photostream/) and the BOM which is also in the bad scans you might end up with the correct values for resistors and stuff...
Hope it helps ...
Le 13 juil. 2012 à 01:41, Dave Manley <dlmanley at sonic.net> a écrit :
> Ahhh...the Brits and the French BFF.
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
More information about the Synth-diy