[sdiy] CZ101 display upgrade

Recompas recompas at gmail.com
Wed Jul 4 07:31:02 CEST 2012


It wasn't too hard, and it fits evenly. I did have to dremmel out the mounting holes on the display's pcb to have it fit properly in the brackets. Or you could drill out the brackets.  All in all not too bad to get it to work.

T



On Jul 3, 2012, at 11:49 PM, Adam Inglis <21pointy at tpg.com.au> wrote:

> 
> Thanks all for the replies. The OLEDs look great and fit the dimensions perfectly - only problem may be they pull 30mA of current compared to single figures for the backlit LCDs.
> Travis, does your new display sit flush with the protective screen? Was there much customising?
> 
> On 03/07/2012, at 11:11 PM, MTG wrote:
> 
>> It was on my list of things to do, but I couldn't get my hands on a CZ. Where are you located?
> 
> I'm in Australia.
> Thanks for the link. It just reminded me - I need to do the same for my DX7!
> 
> 
>> 
>> GB
>> http://musictechnologiesgroup.com/lcd_upgrades.htm
>> 
>> On 7/2/2012 11:27 PM, Adam Inglis wrote:
>>> Anyone here upgraded their CZ to a backlit LCD?
>>> There's a bit of info around, but I'm not having much luck finding a unit that fits the dimensions - in particular the depth of 10 mm. The backlit ones all seem to be around 14mm deep. It sits in a steel mounting bracket, and there may be some leeway, but I thought I'd ask ...
>>> 
>>> cheers
>>> Adam
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>> 
>>> 
>> 
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy



More information about the Synth-diy mailing list