[sdiy] JOMOX

[karl dalen]

400 muppet chef's arguing on which buswidth encoder, pots, OP Amps to use!

Cheers.
KD 

--- Den tors 2010-10-21 skrev Harry Bissell <harrybissell at wowway.com>:

> Från: Harry Bissell <harrybissell at wowway.com>
> Ämne: Re: [sdiy] JOMOX
> Till: "Gergo Palatinszky" <Gergo_Palatinszky at epam.com>
> Kopia: synth-diy at dropmix.xs4all.nl
> Datum: torsdag 21 oktober 2010 18:03
> sounds like the "Chameleon"
> 
> H^) harry
> 
> 
> 
> ----- Original Message -----
> From: Gergo Palatinszky <Gergo_Palatinszky at epam.com>
> To: synth-diy at dropmix.xs4all.nl
> Sent: Thu, 21 Oct 2010 04:50:13 -0400 (EDT)
> Subject: Re: [sdiy] JOMOX
> 
> Hi,
> 
> All the time when I see this kind of projects/synths I'm
> really wondering that we cannot develop an open HW+SW
> platform basically a synth motherboard where everybody can
> develop an own module ... digitally controlled
> switching/routing matrix for audio/control voltages
> ...several controller(encoder) which can be assigned to a
> module(for a time being to set and save parameters there) a
> bus system where 16-24-32-... independent module can be
> plugged in - can be changed easily (different modular config
> can be set very fastly)
> Each module have a digital part for controllers assignment
> and for storing control parameters ...
> 
> At least it would be nice to start a specification round to
> see that this kind of community could be able to do it or
> not.... might comercial modular manufacturer can join to it
> ...
> 
> Br,
>     Pala
> 
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl]
> On Behalf Of cheater cheater
> Sent: 21 October 2010 10:32
> To: David G. Dixon
> Cc: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] JOMOX
> 
> Yeah, and both the hardware and software are buggy as hell.
> And
> insanely expensive. Maybe you're an ape but at least you
> don't trip
> over all the time while walking.
> 
> BTW doesn't sound that amazing either.
> 
> Cheers,
> D.
> 
> On Thu, Oct 21, 2010 at 10:06, Gergo Palatinszky
> <Gergo_Palatinszky at epam.com>
> wrote:
> > Hi,
> >
> > They request the price for "discrete soldering" (and
> for R&D) as this is about 5000 EUR  :O)
> >
> > OK I'll buy at least 22 JOMOX now! :O)))
> >
> > Best Regards,
> > Gergo Palatinszky
> >
> > -----Original Message-----
> > From: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl]
> On Behalf Of Dave Manley
> > Sent: 21 October 2010 09:01
> > To: synth-diy at dropmix.xs4all.nl
> > Subject: Re: [sdiy] JOMOX
> >
> >  On 10/20/2010 10:17 PM, David G. Dixon wrote:
> >> The videos were actually put up by someone called
> "spainwaxlove".  TW just
> >> had them in his favorites list.
> >>
> >
> > Ah...thanks, that helps a lot:
> >
> > http://www.youtube.com/user/spainwaxlove
> >
> > So...the German dude is Jürgen Michaelis of Jomox.
> >
> > Someone should show him the quick way to solder
> surface mount ICs.  Life is too short to solder one leg at
> a time!
> >
> > -Dave
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
> -- 
> Harry Bissell & Nora Abdullah 4eva
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>