[sdiy] wiring is hard!! advice?

Mike profpep at hotmail.com
Wed Nov 5 23:54:51 CET 2008


I just wish a lot of so called professional gear was made that well. Another
work of art from Jim.

Thinking in practical terms - it would make one hell of a kit, especially
without all the panel wiring.

Mike


----- Original Message ----- 
From: "Jim Patchell" <patchell at cox.net>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, November 05, 2008 8:44 PM
Subject: Re: [sdiy] wiring is hard!! advice?


> Here is how I solved wiring:
>
>
http://www.noniandjim.com/Jim/synthmodulesII/index.html#Modular_Analog_Synthesizer
>
> This box have very little...but at a price...took me only 40 hours to
> actually build this box.
>
> -Jim
>
> Dan Snazelle wrote:
> > take a look at this:
> >
> > http://www.flickr.com/photos/13918667@N02/3005944414/
> >
> > 3 small pcbs (home etched) and one big (asm2) board plus a PSU.
> >
> > i am having some trouble figuring out how to mount everything properly
AND get the wires set up in a somewhat nice way. is there an easy way to do
it? should i put the big board in first and THEN the little boards? could i
mount the little boards to the sides and the asm to the bottom?
> >
> > any advice?
> >
> > What do YOU think is the best way to do it? connect the wires on the
boards FIRST and then (and only then) connect them to the pots and switches
> >
> > OR do you think you should put all the boards in the box first and THEN
do the wiring?
> >
> > It's easy to get everything wired until i try to put it all in the box
> >
> > and i cant test a damn thing until the wiring is done. and then if
something doesnt work right, well i guess i will have to pull the boards
out.
> >
> >
> > anyway.....i've got till monday to finish! you guys have all been so
helpful
> >
> > thanks
> >
> >
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> >
>
> -- 
> ----------------------------------------------
> Visit http://www.noniandjim.com
> SDIY: http://www.noniandjim.com/Jim/index.html
> ----------------------------------------------
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>




More information about the Synth-diy mailing list