February 1999 Archives by date
Starting: Mon Feb 1 01:11:18 CET 1999
Ending: Sun Feb 28 23:44:31 CET 1999
Messages: 826
- [AH] CV TO MIDI
Brett Duggan
- What one can find inside a well used PC keyboard!!
BJ
- [AH] CV TO MIDI
J. Larry Hendry
- super cheap PIC chip progger
inman at interpath.com
- (no subject)
THEKn0TiS at aol.com
- [AH] CV TO MIDI
Beszedes Arpad
- Integrating Capacitor
Martin Czech
- Expo conv. heater (tomg et al.)
Martin Czech
- Integrating Capacitor
jorgen.bergfors at idg.se
- Integrating Capacitor
Martin Czech
- Opinions: On op amp replacement
jorgen.bergfors at idg.se
- Trautonium
Martin Czech
- Opinions: On op amp replacement (resista)
Martin Czech
- discrete audio opamps ? (was: Audio Op-Amps)
Haible Juergen
- AW: Audio Op-Amps
Haible Juergen
- AW: Opinions: On op amp replacement (resista)
Haible Juergen
- discrete audio opamps ? (was: Audio Op-Amps)
Martin Czech
- Opinions: On op amp replacement
Rene Schmitz
- Expo conv. heater (tomg et al.)
Rene Schmitz
- discrete audio opamps ? (was: Audio Op-Amps)
Tony Clark
- AW: Opinions: On op amp replacement
Haible Juergen
- max # of eeprom read cycles
Rob
- discrete audio opamps ? (was: Audio Op-Amps)
Edu Silva
- AW: Opinions: On op amp replacement
Rene Schmitz
- max # of eeprom read cycles
Native Son
- TB3030 schematic
Tony Allgood
- max # of eeprom read cycles
Tony Allgood
- discrete audio opamps ? (was: Audio Op-Amps)
Magnus Danielson
- [AH] CV TO MIDI
Chris Stecker
- max # of eeprom read cycles
Rob
- Fwd: Korg ix300 circuit board(?)
Sean Costello
- Proper trace cutting technique?
Brett Duggan
- Fwd: roland sh-3a oscillator
Peri Pakroo
- max # of eeprom read cycles
Brigman, Corley
- max # of eeprom read cycles
Michael B. Irwin
- Looking for info. on SAD 1024...
James D. Goode
- Ebow
Tom Duff
- [AH] CV TO MIDI
J. Larry Hendry
- max # of eeprom/prom/rom read cycles/chip life
Rob
- Expo conv. heater (tomg et al.)
Mark Smart
- Mixer recommendations / kit?
Michael E. Kibat
- Mad Mouse PCBs sent
tomg
- Ebow
Rob
- max # of eeprom read cycles
terry michaels
- max # of eeprom read cycles
WeAreAs1 at aol.com
- max # of eeprom/prom/rom read cycles/chip life
WeAreAs1 at aol.com
- Ebow
Paul Perry
- Ebow
Sean Costello
- Expo conv. heater (tomg et al.)
tomg
- Expo conv. heater (tomg et al.)
tomg
- Expo conv. heater (tomg et al.)
tomg
- Fwd: Korg ix300 circuit board(?)
Jeroen Bruintjes
- Looking for info. on SAD 1024...
Joachim Verghese
- MIDI Time Piece - question
WeAreAs1 at aol.com
- max # of eeprom read cycles
BJ
- AW: Mixer recommendations / kit?
Haible Juergen
- SEM riddles (was: AW: Opinions: On op amp replacement
Haible Juergen
- AW: Proper trace cutting technique?
Haible Juergen
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- Proper trace cutting technique?
Andrew Schrock
- discrete audio opamps ? (was: Audio Op-Amps)
Edu Silva
- Expo conv. heater (tomg et al.)
Ingo Debus
- max # of eeprom read cycles
Ingo Debus
- M.P.C. DSM-2 QUESTION
JASON PHILLIPS
- AW: Audio Op-Amps
Ingo Debus
- AW: discrete audio opamps ? (was: Audio Op-Amps)
Haible Juergen
- Ebow
Curtin, Steven D (Steven)
- Q/Resonance Question
Gordon Ramsay
- Audio Op-Amps
Edu Silva
- discrete audio opamps ? (was: Audio Op-Amps)
Tony Clark
- Mixer recommendations / kit?
Edu Silva
- AW: Audio Op-Amps
Brett Duggan
- Heat results
Tony Clark
- Mixer recommendations / kit?
Florian Anwander
- AW: Audio Op-Amps
kdchrist at umr.edu
- Expo conv. heater (tomg et al.)
Fraser, Colin J
- Mixer recommendations / kit?
Mikko Helin
- Trautonium II
Martin Czech
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- AW: Expo conv. heater (tomg et al.)
Martin Czech
- Expo conv. heater (tomg et al.)
Fraser, Colin J
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- AW: Expo conv. heater (tomg et al.)
Paul Schreiber
- AW: Expo conv. heater (tomg et al.)
Martin Czech
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- Trautonium II
Curtin, Steven D (Steven)
- drum module
Louis Otero
- AW: Expo conv. heater (tomg et al.)
Fraser, Colin J
- 3340 stability
Tony Allgood
- AW: Expo conv. heater (tomg et al.)
Haible Juergen
- AW: Expo conv. heater (tomg et al.)
Fraser, Colin J
- Analog Filters -> Digital
Brian Patrick Towles
- Analog Filters -> Digital
Thomas Hudson
- making a arpegiater and hold circuit for roland hs60
THEKn0TiS at aol.com
- Analog Filters -> Digital
Sean Costello
- Analog Filters -> Digital
Tom Duff
- Analog Filters -> Digital
Sean Costello
- MIDI Time Piece - question
Bissell, Harry
- Analog Filters -> Digital
Brian Towles
- Midi
Allan
- Trautonium II
Michael Maloney
- Trautonium II
Brigman, Corley
- a diode behaving like a cap
Bissell, Harry
- Integrating Capacitor
Bissell, Harry
- a diode behaving like a cap
Bissell, Harry
- Trim-pot debacle (ADVICE PLEASE!)
Chris (the Hex)
- [AH] Trim-pot debacle (ADVICE PLEASE!)
aschrock
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Brett Duggan
- [AH] Trim-pot debacle (ADVICE PLEASE!)
aschrock
- Correct to call 'em DIKES?
Rob & Heather Williams
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Ethan Duni
- Correct to call 'em DIKES?
Florian Anwander
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Florian Anwander
- [AH] Trim-pot debacle (ADVICE PLEASE!)
KA4HJH
- Trim-pot debacle (ADVICE PLEASE!)
tomg
- Correct to call 'em DIKES?
tomg
- Analog Filters -> Digital
Martin Czech
- Parts from Radio Shack?
Rob & Heather Williams
- Trautonium II
Martin Czech
- [AH] Trim-pot debacle (ADVICE PLEASE!)
jorgen.bergfors at idg.se
- Trautonium II
Martin Czech
- Mad Mouse Updates
tomg
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Simon
- [AH] Parts from Radio Shack?
c a l i b a n
- Correct to call 'em DIKES?
removable at mediaone.net
- [AH] Trim-pot debacle (ADVICE PLEASE!)
jorgen.bergfors at idg.se
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Martin Czech
- Correct to call 'em DIKES?
Paul Perry
- Trautonium II
Edu Silva
- Trautonium II
Paul Perry
- Correct to call 'em DIKES?
L. Bupp
- Correct to call 'em DIKES?
Bill Layer
- Big Lew's Garage Sale
L. Bupp
- No subject
Dr S Grainger
- Integrating Capacitor
Tony Clark
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Jim Patchell
- Parts from Radio Shack?
Bissell, Harry
- [AH] Trim-pot debacle (ADVICE PLEASE!)
Bissell, Harry
- Opinions: On op amp replacementsinth-diy at mailhost.bpa.nl
Bissell, Harry
- [AH] Parts from Radio Shack?
Rob & Heather Williams
- [AH] Parts from Radio Shack?
c a l i b a n
- Poly 800 worth? $ (somewhat OT)
Hallgeir Helland
- newbie: vca mixer?
Andras Muranyi
- [AH] Trim-pot POLY-800 MOD
Vertical 8
- Correct to call 'em DIKES?
J.G. Wong
- Poly 800 worth? $ (somewhat OT)
Peter Skinner
- Parts from Radio Shack?
Andrew Schrock
- Poly 800 worth? $ (somewhat OT)
tomg
- Parts from Radio Shack?
Brett Duggan
- Parts from Radio Shack?
Bissell, Harry
- newbie: vca mixer?
Bissell, Harry
- I am a goose (was: Correct to call 'em DIKES?)
Paul Perry
- [AH] Trim-pot debacle (ADVICE PLEASE!)
KA4HJH
- crunchy tweaks
Troy Sheets
- hey any one have a parts for the bassdrum mod on the tr606
THEKn0TiS at aol.com
- Integrating Capacitor
terry michaels
- Message from Internet
terry michaels
- Matching 3080s?
Romeo_Fahl at stream.com
- Correct to call 'em DIKES?
Chris (the Hex)
- Matching 3080s?
Martin Czech
- 324 (was: Opinions: On op amp replacement)
Haible Juergen
- Poly 800 worth? $ (somewhat OT)
BJ
- [AH] Parts from Radio Shack?
Irish
- minimoog VCO board.
Budweiser [FTS]
- Matching 3080s - and new project (VCO)
Haible Juergen
- VCOs
Mikko Helin
- 324 (was: Opinions: On op amp replacement)
terry michaels
- Audio Op-Amps
Mikko Helin
- VCOs
Martin Czech
- Trautonium II
Hugo Haesaert
- alps pots
Paul Perry
- newbie: vca mixer?
Martin Czech
- Trautonium links
Martin Czech
- drum module
Maarten Halmans
- Trautonium II
Haible Juergen
- Integrating Capacitor
Brian Towles
- Integrating Capacitor
Tony Clark
- [AH] Parts from Radio Shack?
Curtin, Steven D (Steven)
- Fw: For Sale from Sally Tilson
Paul Schreiber
- Sally's EMAIL Address
Paul Schreiber
- Parts from Radio Shack?
L.D
- [AH] Parts from Radio Shack?
List, Christopher
- Integrating Capacitor
Tony Clark
- alps pots
Tony Allgood
- [AH] Parts from Radio Shack?
Thomas Hudson
- Data for the BA6110
Tony Allgood
- Parts from Radio Shack?
Cranium
- VCOs
Bissell, Harry
- Fatman
smerf
- [Digital_Hell] hey any one have a parts for the bassdrum mod on the tr606
Electromagnetic Switch
- [Digital_Hell] hey any one have a parts for the bassdrum mod on the tr606
Electromagnetic Switch
- [Digital_Hell] hey any one have a parts for the bassdrum mod on the tr606
Electromagnetic Switch
- poly-800 mods
dave solursh
- mellosoftron2 questions
THEKn0TiS at aol.com
- FATMAN
Scott Gravenhorst
- Trautonium II
Ingo Debus
- [AH] Parts from Radio Shack?
Irish
- AW: Integrating Capacitor
jhaible
- Really Basic Question
Gavin Muir
- [RE: VCOs]
Harry Bissell
- [AH] Parts from Radio Shack?
Steve Varner
- [AH] Parts from Radio Shack?
JWBarlow at aol.com
- Audio Op-Amps
Edu Silva
- Really Basic Question
Gavin Muir
- expo converters
macdonald at evenfall.com
- Diode Spec Question
Scott Gravenhorst
- [AH] Parts from Radio Shack? chess mate!
BJ
- AW: expo converters
jhaible
- [AH] Trim pot advice -- thanks!
Peake
- scope
Ian Fritz
- Really Basic Question
Mark Havard-Brown
- [Diode Spec Question]
Harry Bissell
- [scope]
Harry Bissell
- Trim pot advice -- thanks!
Chris (the Hex)
- POLY 800 NEEDS YOUR HELP!!!!
Chris (the Hex)
- thermal tips re expo converters:
Harry Bissell
- [scope]
Ian Fritz
- [scope]
Merlin Zener
- scope
Don Tillman
- midi controller question
THEKn0TiS at aol.com
- [RE: VCOs]
Martin Czech
- Diode Spec Question
Martin Czech
- expo converters
Martin Czech
- [Digital_Hell] midi controller question
jimg/skoop
- repl pots with vc
Martin Czech
- repl pots with vc
jorgen.bergfors at idg.se
- [RE: VCO]
Mikko Helin
- ODP: scope
Roman Sowa
- repl pots with vc
Haible Juergen
- repl pots with vc
Paul Perry
- repl pots with vc
Martin Czech
- repl pots with vc
Haible Juergen
- [RE: VCOs]
Haible Juergen
- [RE: VCO]
jorgen.bergfors at idg.se
- repl pots with vc
Bissell, Harry
- Rack Mounting
Native Son
- [RE: VCOs]
Bissell, Harry
- [RE: VCO]
Michael B. Irwin
- module construction
Andrew Watson
- thermal tips re expo converters:
Steve Varner
- module construction
Paul Perry
- need help with hs60 repair
THEKn0TiS at aol.com
- sci sixtrack---------HELP
geoffery francis james
- [Re: thermal tips re expo converters:]
Harry Bissell
- [Re: thermal tips re expo converters:]
Martin Czech
- Formant 4Pole Filter
jorgen.bergfors at idg.se
- Back again/Thermal considerations of exp
tim.cockram at RedDragonFM.co.uk
- ODP: repl pots with vc
Roman Sowa
- Tubes (or valves as we like to call them in the UK)
Jezz Brookes
- module construction (again)
Paul Perry
- Tubes tubes freakin tubes!
Bill Layer
- OT: Zeos PCs
Bill Layer
- [Re: thermal tips re expo converters:]
Bissell, Harry
- repl pots with vc
Edu Silva
- Tubes (or valves as we like to call them in the UK)
Jezz Brookes
- Module construction
Plinio Andres Barraza
- Best to clean pots with?
Rob & Heather Williams
- Fw: Slow Dance a good thought no matter what
Dr. Davis
- Just got my EPFM
DrXex at aol.com
- I can/will build!
Paul Perry
- Tubes (or valves as we like to call them in the UK)
Bissell, Harry
- [Re: thermal tips re expo converters:]
Ian Fritz
- [Best to clean pots with?]
Harry Bissell
- Just got my EPFM
Steve Varner
- module construction (again)
Steve Varner
- [Re: Tubes (or valves as we like to call them in the UK)]
Harry Bissell
- [Re: thermal tips re expo converters:]
terry michaels
- [Back again/Thermal considerations of exp]
Harry Bissell
- Best to clean pots with?
KA4HJH
- Just got my EPFM
kdchrist at umr.edu
- Korg MS 20 f->Volt Converter
Martin Czech
- Korg MS20 filters
Martin Czech
- Module construction
Merlin Zener
- Best to clean pots with?
Fraser, Colin J
- elektor vocoder german version
Beszedes Arpad
- Korg MS20 filters
>>>marjan<<<
- Korg MS20 filters
Martin Czech
- Best to clean j-wire with?
Paul Perry
- Korg MS20 filters
Haible Juergen
- [Re: thermal tips re expo converters:]
Haible Juergen
- Korg MS20 filters
Fraser, Colin J
- Best to clean j-wire with?
Fraser, Colin J
- Korg MS20 filters
Martin Czech
- Korg MS20 filters
Haible Juergen
- JEN SX1000
Tal
- Tubes (or valves as we like to call them in the UK)
Bill Layer
- [Re: thermal tips re expo converters:]
Bissell, Harry
- Korg MS 20 f->Volt Converter
Bissell, Harry
- Korg MS 20 f->Volt Converter
Martin Czech
- Tubes (or valves as we like to call them in the UK)
Martin Czech
- repl pots with vc
Edu Silva
- Potted circuits (was: Back again/Thermal considerations of exp)
Edu Silva
- FW: Mad Mouse Parts
tomg
- Korg MS20 filters
IOTech
- speak and spell schematics
Hess Hodge
- repl pots with vc
Michael Buchstaller
- http://www.asu.edu/kasr
Reverend bluE
- c64
Plinio Andres Barraza
- Korg MS 20 f->Volt Converter
Brian Towles
- tr-808 mods
Neo Tribal
- Korg MS 20 f->Volt Converter
Paul Perry
- PS3300 service manual
riccardo
- need some tempcos
Steve Varner
- c64
Chris (the Hex)
- [Re: [Back again/Thermal considerations o]
Harry Bissell
- Talk can be Cheap (speak and spell interface)
Hess Hodge
- Full wave rectifier as Saw-to-Tri converter
Roy Tate
- Korg MS 20 f->Volt Converter
Martin Czech
- Full wave rectifier as Saw-to-Tri converter
Martin Czech
- Mr. H
Martin Czech
- repl pots with vc
Karl ALEXANDRE
- c64
Karl ALEXANDRE
- archive update
Martin Czech
- Full wave rectifier as Saw-to-Tri converter
terry michaels
- Tubes (or valves as we like to call them in the UK)
Haible Juergen
- [Re: thermal tips re expo converters:]
Haible Juergen
- AW: Korg MS 20 f->Volt Converter
Haible Juergen
- Korg MS 20 f->Volt Converter
kimmo at ecdl.hut.fi
- c64
List, Christopher
- [Re: [Back again/Thermal considerations o]
hillview College
- Full wave rectifier as Saw-to-Tri converter
Bissell, Harry
- Full wave rectifier as Saw-to-Tri converter
patchell
- Korg MS 20 f->Volt Converter
Hugo Haesaert
- don't be sad1024
Brian Towles
- don't be sad1024
R.G. Keen
- Tubes (or valves as we like to call them in the UK)
Hugo Haesaert
- does anyone have a service manuel for the hs60
THEKn0TiS at aol.com
- [Re: thermal tips re expo converters:]
Ian Fritz
- does any one know how to tune a hs60??
THEKn0TiS at aol.com
- [Re: thermal tips re expo converters:]
Martin Czech
- SEM riddles (was: AW: Opinions: On op amp replacement
Rene Schmitz
- VC envelope shower
Roman Sowa
- 2-26(CRC)
j.Richardson
- Best to clean j-wire with?
The Dark force of dance
- AW: SEM riddles (was: AW: Opinions: On op amp replacement
Haible Juergen
- AW: [Re: thermal tips re expo converters:]
Haible Juergen
- AW: Best to clean j-wire with?
Haible Juergen
- AW: Full wave rectifier as Saw-to-Tri converter
Haible Juergen
- AW: AW: Full wave rectifier as Saw-to-Tri converter
Haible Juergen
- audio-midiclock generator
Gez
- Moog f->V
Martin Czech
- AW: Best to clean j-wire with?
WeAreAs1 at aol.com
- [RE: Tubes (or valves as we like to call them in the UK)]
Harry Bissell
- No subject
jake maybe
- AW: [Re: thermal tips re expo converters:]
Ian Fritz
- [Re: thermal tips re expo converters:]
Ian Fritz
- About to build my first Fatman - any secrets?
Rob & Heather Williams
- MOTM-700 VC Router demo files
Paul Schreiber
- I'm Home
tomg
- pissed off!! scam ,rubbish crap etc etc!!
Rob & Heather Williams
- Elektor Magazines For Sale
WeAreAs1 at aol.com
- AW: [Re: thermal tips re expo converters:]
jhaible
- pissed off!! scam ,rubbish crap etc etc!!
BJ
- audio-midiclock generator
Florian Anwander
- AW: [Re: thermal tips re expo converters:]
terry michaels
- AW: [Re: thermal tips re expo converters:]
>>>marjan<<<
- AW: [Re: thermal tips re expo converters:]
Ian Fritz
- VCA610 (Burr-Brown)
Edu Silva
- pissed off!! scam ,rubbish crap etc etc!!
Sean Costello
- audio-midiclock generator
WeAreAs1 at aol.com
- [Re: AW: [Re: thermal tips re expo converters:]]
Harry Bissell
- [Re: AW: [Re: thermal tips re expo converters:]]
Harry Bissell
- c64
Thomas Hudson
- AW: [Re: thermal tips re expo converters:]
terry michaels
- AW: [Re: thermal tips re expo converters:]
jhaible
- pissed off!! scam ,rubbish crap etc etc!!
The Dark force of dance
- AW: [Re: thermal tips re expo converters:]
Paul Perry
- pissed off!! scam ,rubbish crap etc etc!!
KA4HJH
- AW: [Re: thermal tips re expo converters:]
Paul Perry
- audio-midiclock generator
Florian Anwander
- ODP: VCA610 (Burr-Brown)
Roman Sowa
- 606 mods questions
Budweiser [FTS]
- AW: [Re: thermal tips re expo converters:]
jhaible
- ODP: c64
Roman Sowa
- AW: [Re: thermal tips re expo converters:]
jhaible
- AW: [Re: thermal tips re expo converters:]
Ian Fritz
- Lin/exp control
Joachim Verghese
- 606 mods questions
Rob
- 606 mods questions
Rob
- Kimball Parts
tomg
- AW: [Re: thermal tips re expo converters:]
Michael B. Irwin
- AW: [Re: thermal tips re expo converters:]
Paul Perry
- audio-midiclock generator
J. Larry Hendry
- PS3100 service manual needed
J.D.McEachin
- AW: Lin/exp control
Haible Juergen
- Octave quantizer (was: thermal tips re expo converters)
jorgen.bergfors at idg.se
- AW: [Re: thermal tips re expo converters:]
Martin Czech
- updated elektor vocoder article (german)
Beszedes Arpad
- AW: AW: [Re: thermal tips re expo converters:]
Haible Juergen
- AW: Lin/exp control
Joachim Verghese
- updated elektor vocoder article (german)
Beszedes Arpad
- Micro ohm LPTC12
John Blacet
- AW: AW: Lin/exp control
Haible Juergen
- AW: AW: Lin/exp control
Joachim Verghese
- Placing graphics on control panels
Rob & Heather Williams
- Tube breadboard
Bill Layer
- AW: AW: [Re: thermal tips re expo converters:]
Steve Varner
- Tempco Resistors (ONE MORE TIME!) was: thermal tips re expo conve rters
List, Christopher
- pissed off!! scam ,rubbish crap etc etc!!
Tim Nowaczyk
- Audio slide Pots
Tim Nowaczyk
- updated elektor vocoder article (german)
BJ
- Placing graphics on control panels
DCMagnuson at aol.com
- Tempco Resistors (ONE MORE TIME!) was: thermal tips re expo c onve rters
Bissell, Harry
- Electronotes and Synth-DIY CD
Christian Oncken
- Placing graphics on control panels
woebm001
- Placing graphics on control panels
Edu Silva
- Micro ohm LPTC12
Steve Varner
- [Re: Placing graphics on control panels]
Harry Bissell
- tempco resistors
Harry Bissell
- AW: [Re: thermal tips re expo convertors:]
terry michaels
- Tempco Resistors (ONE MORE TIME!) was: thermal tips re expo conve rters
jorgen.bergfors at idg.se
- AW: AW: Lin/exp control
BJ
- Tempco Resistors
Joachim Verghese
- 726 (time to change the subject line (;->) )
Haible Juergen
- Tempco Resistors (ONE MORE TIME!) was: thermal tips re expo conve rters
Rene Schmitz
- AW: Kitaro 'octave glide'
Haible Juergen
- 726 (time to change the subject line (;->) )
terry michaels
- pissed off!! scam ,rubbish crap
terry michaels
- [Re: Placing graphics on control panels]
List, Christopher
- [Re: Placing graphics on control panels]
Liverdrain
- 606 mods questions
Liverdrain
- archive update
Edu Silva
- 726 (time to change the subject line (;->) )
Edu Silva
- Tempco Resistors
Jezz Brookes
- Rhodes Chroma
Edu Silva
- Type of LED switches used on Arp Pro-DGX?
Rob & Heather Williams
- Thermistors
kel at cp.duluth.mn.us
- tempco's-----please explain
geoffery francis james
- MS20 shemo at my place!
BJ
- 606 mods questions
Budweiser [FTS]
- tempco's-----please explain
Paul Perry
- tempco's-----please explain
Martin Czech
- Multivox Bass Pedals
Dr S Grainger
- Tempco Resistors
Fraser, Colin J
- Tempco Resistors
pharding at mail.ndirect.co.uk
- Tempco Resistors
Joachim Verghese
- Multivox Bass Pedals
steve.ridley at bbc.co.uk
- AW: Tempco Resistors
Haible Juergen
- TB-303 Casing
Richard Kaplan
- 606 mods questions
Liverdrain
- simple question
Samuel Luckenbill
- Mad Mouse Update & Mods
bryantrv
- Keyboard scanner
Hallgeir Helland
- Mad Mouse Update & Mods
tomg
- Farnnel (was Tempco Resistors)
woebm001
- TTL and [Keyboard scanner]
Harry Bissell
- Mad Mouse Heater
tomg
- Clever and Useful MM Mod Contest
tomg
- Farnnel (was Tempco Resistors)
jhaible
- Tempco Resistors
Steve Varner
- Matrix board!
Paul Perry
- Clever and Useful MM Mod Contest
tomg
- Mad Mouse Update & Mods
tomg
- Info needed on the JLcooper MIDInterface i/o
DubbleDub at aol.com
- Keyboard scanner
Beszedes Arpad
- Matrix board!
jorgen.bergfors at idg.se
- Through-Zero FM as a Leslie
Scott Gravenhorst
- Matrix board!
Paul Perry
- Matrix board!
BJ
- VCO from Harris 8038 ic? or Exar xr2206 ?
Kip Chatterson
- EMS Pitch 2 Voltage
Martin Czech
- Through-Zero FM
WeAreAs1 at aol.com
- AW: Matrix board!
Haible Juergen
- that japanese site ...
Haible Juergen
- Matrix board!
jorgen.bergfors at idg.se
- AW: Matrix board!
jorgen.bergfors at idg.se
- AW: AW: Matrix board!
Haible Juergen
- Through-Zero FM
Martin Czech
- Matrix board!
List, Christopher
- AW: Through-Zero FM
Haible Juergen
- that japanese site ...
Fraser, Colin J
- AW: that japanese site ...
Haible Juergen
- Chip recommendations for VCO's or discreate?
Kip Chatterson
- AW: Matrix board!
Haible Juergen
- AW: Matrix board!
jorgen.bergfors at idg.se
- Thumbwheel (was:Matrix board!)
Haible Juergen
- Through-Zero FM as a Leslie
Don Tillman
- AW: Through-Zero FM
Haible Juergen
- Sheperd Function Generator/Tone
L. Bupp
- AW: Through-Zero FM as a Leslie
Haible Juergen
- that japanese site ...
Fraser, Colin J
- AW: that japanese site ...
Haible Juergen
- that japanese site ...
Fraser, Colin J
- Through-Zero FM
Michael B. Irwin
- VAT warning
Tony Allgood
- Keyboard scanner
BJ
- that japanese site ...
Roy Tate
- that japanese site ...
tomg
- Korg-35, first try
jhaible
- Sheperd Function Generator/Tone
Thomas Hudson
- LM13600, 13700 National Semi obsolete
Bissell, Harry
- that japanese site ...
Paul Perry
- VCO from Harris 8038 ic? or Exar xr2206 ?
Paul Perry
- korg-35 apparently works
jhaible
- that japanese site ...
jhaible
- that japanese site ...
Paul Perry
- AW: that japanese site ...
BJ
- that japanese site ...
BJ
- Through-Zero FM
Martin Czech
- korg-35 apparently works
tomg
- korg-35 apparently works
Martin Czech
- LM13600, 13700 National Semi obsolete!!! .....NOT YETI......!!
BJ
- that japanese site ...
BJ
- AW: that japanese site ...
Fraser, Colin J
- korg-35 apparently works
Fraser, Colin J
- Source for Moog style pitch bend pots and wheels?
Rob & Heather Williams
- VCO from Harris 8038 ic? or Exar xr2206 ?
Gene Zumchak
- AW: korg-35 apparently works
Haible Juergen
- VCO from Harris 8038 ic? or Exar xr2206 ?
Martin Czech
- Source for Moog style pitch bend pots and wheels?
Jim Johnson
- Through-Zero FM
Martin Czech
- AW: that japanese site ...
Rene Schmitz
- Through-Zero FM
Michael B. Irwin
- Through-Zero FM
Dan Slater
- New Member
Gene Zumchak
- Through-Zero FM
Michael B. Irwin
- Through-Zero FM
jhaible
- that japanese site ...
BJ
- korg-35 apparently works
BJ
- that japanese site ...
The Old Crow
- VCO from Harris 8038 ic? or Exar xr2206 ?
Paul Perry
- Sources for fine grained cabinet wood?
Robert Williams
- serge-
Gur Milstein
- New Member
Buck Buchanan
- HiGene
Harry Bissell
- Through-Zero FM
Donald Johnson
- cem CLARIFICATION
Paul Schreiber
- that japanese site ...
Minoru Yokoo
- Real time FM display
Dan Slater
- HiGene
Sean Costello
- that japanese site ...
Osamu Hoshuyama
- New Member
BJ
- Tom's Synth Cookbook
tomg
- Phaseshift / Osc Sync idea
Per Mattsson
- Sources for fine grained cabinet wood?
Thomas Hudson
- LM13600, 13700 National Semi obsolete!!! .....NOT YETI......!!
Edu Silva
- AW: Matrix board! (a CMOS one)
Edu Silva
- New Member
Edu Silva
- Phaseshift / Osc Sync idea
Harry Bissell
- Sources for fine grained cabinet wood?
Jim Johnson
- LM13600, 13700 National Semi obsolete!!! .....NOT YETI......!!
Grant Richter
- Phaseshift / Osc Sync idea
Grant Richter
- Phaseshift / Osc Sync idea
Paul Perry
- Descret OTA was "that Japanese site"
tomg
- maxxvcf8-a
david leigh
- Doepfer power hookup
DJINNXXX6 at aol.com
- Digital controlled filter.
The Dark force of dance
- Descret OTA was "that Japanese site"
tomg
- maxxvcf8-a
tomg
- Descret OTA was "that Japanese site"
tomg
- Quick Beginner's Q:
Liverdrain
- Sync via cross-coupling?
Ian Fritz
- Phaseshift / Osc Sync idea
Michael B. Irwin
- Doepfer power hookup
kel at cpinternet.com
- Descret OTA was "that Japanese site"
BJ
- AW: that japanese site ...
Kimmo Koli
- LM13600 vs LM13700N
Jezz Brookes
- LM13600 vs LM13700N
Edu Silva
- Simulation Software and Chip Cross Reference
inman at interpath.com
- New Member
Chris Crosskey
- New Member
J. Larry Hendry
- The science of reverb springs
Rob & Heather Williams
- The science of reverb springs
JWBarlow at aol.com
- LM13600 vs LM13700N
tomg
- LM13600 vs LM13700N
tomg
- Descret OTA was "that Japanese site"
tomg
- The science of reverb springs
Mark Amundson
- The science of reverb springs
Paul Perry
- Japanese and Korg35
Martin Czech
- Thumbwheel (was:Matrix board!)
jorgen.bergfors at idg.se
- Re(2): Phaseshift / Osc Sync idea
Per Mattsson
- mixer
Ken Stone
- Re(2): Phaseshift / Osc Sync idea
Martin Czech
- [Fwd: analog sequencer]
Anders Sponton
- AW: Japanese and Korg35
jhaible
- AW: Japanese and Korg35
Martin Czech
- Sources for fine grained cabinet wood?
Gene Zumchak
- Digital controlled filter.
Ingo Debus
- SMS 252 memory system
geoffery francis james
- Descret OTA was "that Japanese site"
Rene Schmitz
- Sources for fine grained cabinet wood?
Bill Layer
- REVERB ANSWERS HERE!
L.D
- BEST EM KITS SITE IS HERE!
L.D
- Home Depot sells nice wood...
Harry Bissell
- Digital controlled filter.
John Speth
- Thumbwheel (was:Matrix board!)
Harry Bissell
- Digital controlled filter.
KA4HJH
- SMS 252 memory system
Paul Perry
- serge-
Gur Milstein
- LM13600 vs LM13700N
Edu Silva
- SMS 252 memory system
terry michaels
- Digital controlled filter.
The Dark force of dance
- Descret OTA was "that Japanese site"
tomg
- Japanese and Korg35
tomg
- new member happiness and question
kel at cpinternet.com
- Digital controlled filter.
Ingo Debus
- LM13600 vs LM13700N
tomg
- Keyboard CV
jteir at cc.hut.fi
- source for keyboardswithces
Heiko van der Linden
- CA3046 vs LM3046
Jezz Brookes
- Inverter to non-inverter cct
Jezz Brookes
- source for keyboardswithces
jorgen.bergfors at idg.se
- Japanese and Korg35
jhaible
- CA3046 vs LM3046
Paul Perry
- Inverter to non-inverter cct
Paul Perry
- Descret OTA was "that Japanese site"
terry michaels
- Inverter to non-inverter cct(more)
Paul Perry
- Inverter to non-inverter cct
jorgen.bergfors at idg.se
- source for keyboardswithces
Budweiser [FTS]
- Inverter to non-inverter cct
Edu Silva
- Japanese and Korg35
Fraser, Colin J
- CA3046 vs LM3046
Edu Silva
- Inverter to non-inverter cct
Gene Zumchak
- Japanese and Korg35 [Korg MS50]
Martin Czech
- Rack-mount AT/ATX case
Bill Layer
- Descret OTA was "that Japanese site"
jhaible
- Keyboard CV
Edu Silva
- CA3046 vs LM3046
Gene Zumchak
- The science of reverb springs
Don Tillman
- Descret OTA was "that Japanese site"
Liverdrain
- Descret OTA was "that Japanese site"
Rene Schmitz
- Inverter to non-inverter cct
Bissell, Harry
- Descret OTA was "that Japanese site"
Edu Silva
- Vs: Keyboard CV
Sebastian Teir
- Descret OTA & Simulator
Gerry Dahl
- Descret OTA was "that Japanese site"
Gene Zumchak
- Descreet OTA from CA3096
jhaible
- Inverter to non-inverter cct
Romeo_Fahl at stream.com
- 35 - the next step
jhaible
- Descret OTA & Simulator
jhaible
- 606 mods..screwy...
kel at cpinternet.com
- The science of reverb springs
Paul Perry
- We are a clearing house for targeted email lists, general lists and for advertising !
goodnews at interburp.com
- LM13600 vs LM13700N
tomg
- CA3046 vs LM3046
L.D
- 606 mods..screwy...
Andrew Schrock
- Descret OTA & Simulator
Michael B. Irwin
- The science of reverb springs
Rob & Heather Williams
- Descret OTA was "that Japanese site"
terry michaels
- The science of reverb springs
JWBarlow at aol.com
- LM13600 vs LM13700N
tomg
- The science of reverb springs
Paul Perry
- The science of reverb springs
KA4HJH
- 606 mods..screwy...
kel at cpinternet.com
- No Output on JX-8P
Tim Curtis
- 35 - the next step
tomg
- JH VCHADSR up and running!
jorgen.bergfors at idg.se
- The science of reverb springs
Ethan Duni
- 35 - the next step
jorgen.bergfors at idg.se
- JX8P Addendum
Tim Curtis
- Reverb Springs
Jules Ryckebusch
- ODP: Descret OTA & Simulator
Roman Sowa
- 2040 clone schemos error !
jhaible
- Descret OTA was "that Japanese site"
jhaible
- 35 - the next step
jhaible
- 35 - the next step
jorgen.bergfors at idg.se
- No subject
jorgen.bergfors at idg.se
- 35 - the next step
jhaible
- Descret OTA was "that Japanese site"
terry michaels
- 2040 clone schemos error !
jorgen.bergfors at idg.se
- Descret OTA was "that Japanese site"
Joachim Verghese
- The science of reverb springs
Ian Fritz
- Descreet OTA from CA3096
Jim Patchell
- The science of reverb springs
Don Tillman
- reverb springs torsional vs longitudinal
Bissell, Harry
- The science of reverb springs
Don Tillman
- The science of reverb springs
Ethan Duni
- Descreet OTA from CA3096
Edu Silva
- 35 - the next step
Steve Ridley
- reverb springs torsional vs longitudinal
Ingo Debus
- Moog replacement keyboard for sale on ebay
Rory McDonald
- Paia equipment
Rory McDonald
- Please remove
Elias Holman
- The science of reverb springs and TB's VCA
Tony Allgood
- Paia equipment
Jim Johnson
- Descret OTA was "that Japanese site"
tomg
- 2040 clone schemos error !
jhaible
- TB's VCA (was: Re: The science of reverb springs and TB's VCA)
Rene Schmitz
- Descret OTA was "that Japanese site"
terry michaels
- BA6110 (was: Re: The science of reverb springs and TB's VCA)
jhaible
- 35 - the next step
jhaible
- opamp compensation in integrator application (was:Re: Descret OTA )
jhaible
- 35 - the next step
tomg
- LM13600/LM13700 Clarification Question
Scott Gravenhorst
- opamp compensation in integrator application (was:Re: Descret OTA )
terry michaels
- Good Apple II synth
Steve Varner
- need tg33 editor
THEKn0TiS at aol.com
- reverb springs torsional vs longitudinal
WeAreAs1 at aol.com
- Good Apple II synth
KA4HJH
- The science of reverb springs
Don Tillman
- AW: opamp compensation in integrator application (was:Re: Descret OTA )
Haible Juergen
- Design your own waveform synths?
Rob & Heather Williams
- AW: AW: Matrix board! (a CMOS one)
Haible Juergen
- [AH] Design your own waveform synths?
.v/jek.
- Bernie Hutchins, Electronotes, Copyrights
John Blacet
- opamp compensation in integrator application
Joachim Verghese
- Design your own waveform synths?
Martin Czech
- Design your own waveform synths?
jorgen.bergfors at idg.se
- MS-50 filter
jorgen.bergfors at idg.se
- Design your own waveform synths?
Jerry Federspiel
- Gold plated connectors
jorgen.bergfors at idg.se
- Design your own waveform synths?
Martin Czech
- MS-50 filter
Martin Czech
- Good Apple II synth
I Dream In 3D
- ba6110
Heiko van der Linden
- Design your own waveform synths?
Martin Czech
- MS-50 filter
Martin Czech
- AW: opamp compensation in integrator application (was:Re: Descret OTA )
terry michaels
- reverb springs torsional vs longitudinal
Bissell, Harry
- AW: MS-50 filter
Haible Juergen
- Paia equipment
Thomas Hudson
- [AH] Design your own waveform synths?
Andrew Scheidler
- AW: LM13600/LM13700 Clarification Question
Haible Juergen
- Gold plated connectors
Bill Layer
- Can someone -please- help me unsub.
slappy
- need advice on power supply assembly
Josh Davison
- CA3080 Pin #5
Terry Michaels
- [AH] Design your own waveform synths?
L.D
- Gold plated connectors
Fraser, Colin J
- Bernie Hutchins, Electronotes, Copyrights
Romeo Fahl
- Design your own waveform synths?
Gene Zumchak
- CA3080 Pin #5
Gerry Dahl
- Design your own DW8000 synths?
Bissell, Harry
- what makes sound interesting (was: Design your own waveform synths?)
Jerry Federspiel
- CA3080 Pin #5
Gene Zumchak
- Design your own waveform synths?
Robert Williams
- Bernie Hutchins, Electronotes, Copyrights
Thomas Hudson
- 35 - the next step
Hugo Haesaert
- CA3080 Pin #5
Bissell, Harry
- BA6110 (was: Re: The science of reverb springs and TB's VCA)
Tony Allgood
- Design your own DW8000 synths?
Bissell, Harry
- need advice on power supply assembly
Tony Allgood
- AW: Matrix board! (a CMOS one)
Edu Silva
- [AH] Design your own waveform synths?
Samuel Luckenbill
- Bernie Hutchins, Electronotes, Copyrights
Sean Costello
- TRI-WAVE CONVERTER
INDRID COLD
- Bernie Hutchins, Electronotes, Copyrights
Sean Costello
- Hello/Vox organ fate
Doug Tymofichuk
- AW: AW: Matrix board! (a CMOS one)
Ken Stone
- Hello/Vox organ fate
Doug Tymofichuk
- tri-wave converter?
INDRID COLD
- fatman problems ...
Bauke van der Wal
- Design your own waveform synths?
Christian Oncken
- Design your own waveform synths?
Bissell, Harry
- Good Apple II synth
J.G. Wong
- tri-wave converter?
Paul Perry
- 35 - the next step
jhaible
- B*rnie Hutch*ns, Electr*notes, C*pyrights
Paul Perry
- Bernie Hutchins, Electronotes, Copyrights
jhaible
- Hello/Vox organ fate
Ken Stone
- Bernie Hutchins, Electronotes, Copyrights
J.G. Wong
- Reverb and Op Amp info thanks are in order.
JWBarlow at aol.com
- Design your own waveform synths?
Gene Zumchak
- Bernie Hutchins, Electronotes, Copyrights
inman at interpath.com
- [tri-wave converter?]
Harry Bissell
- MK-50 filter / CA3019
Harry Bissell
- Design your own waveform synths?
Ethan Duni
- Bernie Hutchins, Electronotes, Copyrights
The Dark force of dance
- MOTM VCO data available
Paul Schreiber
- JX8P Voltages
Tim Curtis
- Design your own waveform synths?
Martin Czech
- AW: MK-50 filter / CA3019
Haible Juergen
- Bernie Hutchins, Electronotes, Copyrights
Martin Czech
- Design your own DW8000 synths?
Martin Czech
- Gold plated connectors
jorgen.bergfors at idg.se
- 35 - the next step
tomg
- BA6110 (was: Re: The science of reverb springs and TB's VCA)
Fraser, Colin J
- Design your own waveform synths?
Martin Czech
- 35 - the next step
tomg
- Design your own DW8000 synths?
jorgen.bergfors at idg.se
- Design your own waveform synths?
Paul Perry
- usefullness of E.N.
Martin Czech
- state var allpass output
Martin Czech
- Sines breaking down (was: AW: 35 - the next step)
Haible Juergen
- AW: 35 - the next step
Haible Juergen
- LM13600/LM13700 Clarification Question
Edu Silva
- AW: AW: Matrix board! (a CMOS one)
Haible Juergen
- usefullness of E.N.
Paul Perry
- MK-50 filter / CA3019
Edu Silva
- usefullness of E.N.
Ian Fritz
- AW: MK-50 filter / CA3019
Haible Juergen
- AW: AW: Matrix board! (a CMOS one)
Ullrich Peter
- AW: Matrix board! (a CMOS one)
Bissell, Harry
- Re Bernie Hutchins, copyright etc
tim.cockram at RedDragonFM.co.uk
- state var allpass output
Michael B. Irwin
- AW: Matrix board! (a CMOS one)
Edu Silva
- state var allpass output
Don Tillman
- 35 - the next step
Hugo Haesaert
- AW: AW: Matrix board! (a CMOS one)
Hugo Haesaert
- usefullness of E.N.
KA4HJH
- Bernie Hutchins, Electronotes, Copyrights
Tim Nowaczyk
- No subject
Doug Tymofichuk
- AW: Matrix board! (a CMOS one)
David Halliday (Volt Computer)
- Casio sk series mods
Andrew Schrock
- 35 - the next step
tomg
- rs-09 and midi
david leigh
- Sines breaking down (was: AW: 35 - the next step)
tomg
- Potted circuits (was: Back again/Thermal considerations of exp)
Rob
- need tg33 editor
dave solursh
- Web synth-diy archive
Steve Varner
- OB-8 Calibration
Tim Curtis
- o) BASIC PRoJECT
Sotirios Batz
- remove
Hutch
- simple discrete VC pan ckt? anyone?
Paul Perry
- remove
NetVision Tech. Support.
- AW: Matrix board! (a CMOS one)
Edu Silva
- simple discrete VC pan ckt? anyone?
Edu Silva
- OB-8 Calibration
jhaible
- Sines breaking down (was: AW: 35 - the next step)
jhaible
- SMD modules (was Re: Potted circuits)
Edu Silva
- Question
Hutch
- off?
Hutch
- off?
Andrew Schrock
- SMD modules (was Re: Potted circuits)
jhaible
- sorry meant VC crossfade ckt
Paul Perry
- Web synth-diy archive
Liverdrain
- need tg33 editor
Liverdrain
- get off?
Rob & Heather Williams
- Web synth-diy archive
Brett Duggan
- remove
Jerry Federspiel
- sorry meant VC crossfade ckt
Edu Silva
- SMD modules (was Re: Potted circuits)
Edu Silva
- HEY SYNTH-DIY ADMINISTRATOR!
slappy
- Art of Electronics book on sale
JWBarlow at aol.com
- sorry meant VC crossfade ckt
Paul Perry
Last message date:
Sun Feb 28 23:44:31 CET 1999
Archived on: Fri Apr 1 13:02:33 CEST 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).