AW: Compensated Exp generators and VCO's
sscprick at horus.sara.nl
Tue Jun 6 09:02:08 CEST 1995
In message <2FCD0649 at MSMGATE.M30X.NBG.SCN.DE> Juergen Haible wrote:
> > - Did you compensate for the discharge time in the
> > sawtooth generator and bulk resistance in the exp
> > generator?
> A common way to compensate that effect is a simple resistor
> (or trimpot) in series to the capacitor. If You have a discharge
> time T and a capacitance C, then R=T/C should compensate to 100%.
> Make sure that the comparator input is connected to the current-
> source/trimpot node and not directly to the capacitor.
Hmm... that works of course, but I think it does cost you linearity
of the sawtooth shape itself, as you're now charging the capacitor
via a resistor. The treshold-modification method seems more elegant?
rick at sara.nl http://www.sara.nl/Rick.Jansen
S&H's a module and s&h's looking good
More information about the Synth-diy